Sony SPP-A945, Руководство по эксплуатации, Страница: 13 / 86

Basics
13
EN
Basics
Basics
Making calls
1
Press
(TALK/FLASH)
.
The TALK lamp lights up, then you
will hear a dial tone. If you hear beeps,
move closer to the base phone.
2
Dial the phone number.
3
When you are done talking, press
(OFF) or replace the handset on the
base phone.
The TALK lamp goes off.
Additional tasks
To
Put a call on hold
Improve reception
Adjust the handset volume
Switch to tone dialing temporarily
* If you hear a long beep when you press (CHANNEL) , move closer to the base
phone.
Notes
• Before dialing, make sure you can hear the dial tone. Otherwise you cannot
dial correctly.
• When the TALK lamp lights up by pressing (TALK/FLASH) , the IN USE lamp
on the base phone lights up simultaneously.
• When the TALK lamp repeats sets of two flashes, the base phone is in use.
If the handset battery becomes weak during a call
You hear a beep and the BATT LOW lamp on the handset flashes.
The call will disconnect soon. Replace the handset on the base phone to
charge.
Do this
Press
(HOLD)
. The TALK lamp flashes slowly.
Press (TALK/FLASH) to resume the conversation.
Press
(CHANNEL)
*.
Slide the VOL switch.
Press (*TONE) after you are connected. The line
will remain in tone dialing until disconnected.
TALK lamp
(*TONE)
(CHANNEL)
(HOLD)
VOL switch
(REDIAL)
continued