Sony SPP-A2470 Скачать руководство пользователя

Страница: 65 / 72

Additional Information

Additional Information

Remedy

• Move the handset closer to the base unit.
• Make sure the battery is fully charged (page 11).

• Make sure you have subscribed to Caller ID service.
• Caller ID service may not work when the phone is

connected to a Private Branch Exchange (PBX).

• The call is made through company which does not

offer Caller ID service. ”OUT OF AREA” will appear
on the display.

• The call was “blocked”. “PRIVATE” will appear on

the display.

• You answered the call while “

RINGING

” is

displayed. Be sure to answer after the Caller ID data is
displayed.

• Make sure you have subscribed to “Caller ID with

call waiting” service (page 59).

• Make sure nobody is talking on another phone on the

same telephone line.

• Make sure you entered the area code correctly (page

14).

• You may need to change the number of digits of the

phone number (page 57).

• This function may not work when the phone is

connected to a Private Branch Exchange (PBX).

• If the call is from an office which uses multiple lines,

the phone number may not match the number you
put in the memory.

• If you stored the phone number with an outside line

access digit in the Phone Directory because the phone
is connected to a Private Branch Exchange (PBX), the
phone number will not match the Caller ID data.

Symptom

You cannot operate with the
handset.

The caller’s name and/or
phone number does not appear
on the display.

The caller’s name and/or
phone number does not appear
on the display during call
waiting.

You cannot dial the number
from the Caller ID list.

The memory match function
does not work.

Caller ID

Operating

from the

handset

Содержание SPP-A2470









































































Результаты поиска

Содержание SPP-A2470

Отзывы:

Похожие инструкции для SPP-A2470

Бренды по названию

Популярные бренды

Sony SPP-A2470, Руководство по эксплуатации

Результаты поиска

Содержание SPP-A2470

Отзывы:

Похожие инструкции для SPP-A2470

Бренды по названию

Популярные бренды