167
Settings
Enabling USB tethering
1
Connect the terminal to a PC with
USB cable A to C 01 (optional) etc.
(P.43).
･
The "Use USB to" screen appears on the
terminal.
･
When a screen for installing driver
software appears, wait for a while until
the installation is complete.
･
When the confirmation screen of
installing software appears on the
terminal, tap [SKIP] or [CANCEL].
2
[USB tethering].
3
Tap
for "USB tethering".
･
When you use this function for the first
time, the driver software for the
terminal is installed to a PC. Wait for a
while until installation is complete.
❖
Information
･
System requirements (OS) for USB tethering are as
follows.
- Microsoft Windows 10
- Microsoft Windows 8.1
- Microsoft Windows 7
･
In USB tethering mode, you cannot access your
terminal's internal storage or microSD card from the
PC.
･
USB tethering can be used with the portable hotspot
or Bluetooth tethering at the same time.
Enabling Portable hotspot
You can use the terminal as a Wi-Fi access
point to connect up to 10 wireless LAN
devices to the Internet simultaneously.
1
From the Home screen,
u
[Settings]
u
[Network &
Internet]
u
[Hotspot & tethering].
2
Tap
for "Portable hotspot".
❖
Information
･
If the portable hotspot starts while connecting to Wi-
Fi network, Wi-Fi connection is disconnected. Wi-Fi
network is automatically connected when the
portable hotspot ends.
･
The portable hotspot can be used with USB
tethering or Bluetooth tethering at the same time.
･
To connect a wireless LAN device via NFC, tap [One-
touch portable hotspot] in Step 2.
･
If you operate from the Home screen, [Portable
hotspot settings]
u
[Power save] to enable power
saving, the portable hotspot turns off automatically
when the specified time arrives without connecting
to wireless LAN devices.
Содержание SO-03K
Страница 1: ...17 10 INSTRUCTION MANUAL ...