70
en | Configuration
Network camera
2019-07 | V01 | DOC
User manual
Sony Corporation
–
Dominant color auto
mode takes into account any dominant color in the image (for
example, the green of a football pitch or of a gaming table) and uses this information to
obtain a well balanced color reproduction.
–
In
Manual
mode the Red, Green, and Blue gain can be manually set to a desired position.
Hold
Click
Hold
to put ATW on hold and save the current color settings. The mode changes to
manual.
RGB-weighted white balance
In an auto mode,
RGB-weighted white balance
can be switched On or Off. When On,
additional fine tuning of the automatic color reproduction can be made with the R, G and B
weight sliders.
R-gain
In
Manual
white balance mode, adjust the red gain slider to offset the factory white point
alignment (reducing red introduces more cyan).
G-gain
In
Manual
white balance mode, adjust the green gain slider to offset the factory white point
alignment (reducing green introduces more magenta).
B-gain
In
Manual
white balance mode, adjust the blue gain slider to offset the factory white point
alignment (reducing blue introduces more yellow).
Note:
It is only necessary to change the white point offset for special scene conditions.
Default
Click
Default
to set all video values to their factory setting.
4.3.4
ALC
ALC mode
Select the mode for automatic light-level control:
–
Fluorescent 50
Hz
–
Fluorescent 60
Hz
–
Standard
ALC level
Adjust the video output level (-15 to 0 to +15).
Select the range within which the ALC will operate. A positive value is more useful for low-
light conditions; a negative value is more useful for very bright conditions.
ALC - average vs. peak
(Only applicable to SNC-HMX cameras)
The saturation (av-pk) slider configures the ALC level so that it controls mainly on scene
average level (slider position -15) or on scene peak level (slider po15). Scene peak
level is useful for capturing images that contain car headlights.
Exposure
Automatic exposure
Select to let the camera automatically set the optimum shutter speed. The camera tries to
maintain the selected shutter speed as long as the light level of the scene permits.
1.
Select the
Min. frame rate
for automatic exposure. (The values available depend on the
value set for the
Sensor mode
in the
Installer Menu
).
Содержание SNC-EMX30
Страница 274: ......
Страница 275: ... Bosch Security Systems B V 2019 2019 07 V01 ...