Network Camera
1
Preparing the camera
1
Attach the supplied Wi-Fi module to the module connector.
Connect the supplied AC adapter to the power input terminal of this
unit, then connect to a wall outlet.
Wi-Fi module
(IFU-WLM3)
POWER indicator
NETWORK indicator
LED indicators
Confirm that the POWER indicator turns green about one minute
after connecting to the wall outlet, then see
2
.
2
Connecting to a Wi-Fi network
1
Set the router’s WPS to valid, and perform the following steps within
one minute.
For details, refer to the operating instructions of your router.
2
Press the WPS button, then confirm that the POWER indicator and
NETWORK indicator flash green.
Rear panel
WPS button
It may take about 2 minutes to establish a WPS connection.
Connection was successful.
The POWER indicator and NETWORK indicator light green.
Wi-Fi network connection was successful. See
3
.
Connection was not successful.
The POWER indicator lights green, and the NETWORK indicator flashes orange.
Return to
2
-1.
3
Confirm the camera video images
1
Download “SNC toolbox” installer from the following URL.
http://www.sony.net/ipela/snc
2
Install SNC toolbox.
Decompress the downloaded installer zip file.
Double-click “SncToolbox_Setup.exe.”
For details on installation and usage, refer to the Application Guide.
3
Start SNC toolbox.
The camera(s) connected to the local network is detected and its list is
displayed on the Monitor.
4
To access the camera, double-click the model name “SNC-CX600W” and
start the web browser.
5
Confirm the video images via the web browser.
Example
Main menu
Control panel
Monitor
Confirmation of camera video images is finished.
For details, see the User's Guide.
4-474-879-
11
(1)
© 2013 Sony Corporation
Printed in China
Quick Start Guide
SNC-CX600W
About the manuals
Quick Start Guide (this document)
ˎ
ˎ
The Quick Start Guide describes the camera setting method. Be sure to read this
before operating.
Safety Regulations (supplied)
ˎ
ˎ
The Safety Regulations describes the secure usage of camera. Be sure to read it.
Installation Manual (supplied)
ˎ
ˎ
The Installation Manual describes the camera installation and connection. Be
sure to read it.
On-line manuals
ˎ
ˎ
You can download the above manuals from the following URL.
http://www.sony.net/ipela/snc
About system configuration
Computer
Router
Notes
Prepare a Wi-Fi CERTIFIED and WPS compatible router and computer.
ˎ
ˎ
The factory setting of Wi-Fi and wired network of the camera is DHCP.
ˎ
ˎ
Validate the DHCP setting of your router.
ˎ
ˎ
Connecting to a Wi-Fi network
SNC toolbox
1 When you begin, “User Account Control – An unidentified program wants access
*
to your computer” may appear. In this case, click “Allow.”
2 If your computer uses a personal firewall software or anti-virus software, SNC
*
toolbox may not operate correctly. In this case, invalidate the corresponding
software.
3 If you are using Windows XP Service Pack 2 or later, Windows Vista, Windows 7 or
*
Windows 8, disable Windows Firewall. For details, refer to the Application Guide.
4 For details on fixed IP settings, DNS server address, HTTP port settings, or Proxy
*
Server settings, see the Application Guide.
5 Before installing SNC toolbox, log in to your computer as Administrator.
*
Web browser
6 When you display the camera viewer for the first time, “Security Warning” is
*
displayed on the monitor. Click [Yes], and install ActiveX Control.
7 Before installing ActiveX Control, log in to your computer as Administrator.
*
8 If installation of ActiveX is prohibited by the pop-up block function of Internet
*
Explorer or pop-up blocking software, installation of ActiveX is not possible.
9 If video images are not displayed correctly, set the security level of Internet
*
Explorer to [Medium] or lower. For details, see the User's Guide.
10 If your computer uses anti-virus software, security software, personal firewall,
*
or pop up blocker, camera performance (displayed frame rate) may deteriorate.
11 While accessing this unit, web pages are displayed in JavaScript. If your
*
computer uses the above anti-virus software, etc., web pages may not be displayed
correctly.
Help
