Sony SLV-X847ML Скачать руководство пользователя страница 49

Страница: 49 / 76

Basic Operations

Basic Operations

To record satellite broadcasts

If you connect the satellite tuner and the VCR, you can record satellite
programmes.

Turn on the satellite tuner.

On the satellite tuner, select the satellite programme for which you wish
to make a timer setting.

Follow the steps on pages 47 and 48.

Keep the satellite tuner turned on until the VCR finishes recording the
satellite programme for which you have made a timer setting.

To use the VCR after setting the timer

To use the VCR before a timer recording begins, just press

. The TIMER

indicator turns off and the VCR switches on. Remember to press

to reset

the VCR after using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter.
• Display tape information on the TV screen.
• Check the timer settings.
• Watch another TV programme.

Tip

• To cancel the procedure, press G-CODE before pressing SET.

Notes

• The G-CODE used in this VCR is for Singapore, Malaysia, Hong Kong, Macao, etc.

and cannot be used in areas such as U.S.A., Canada, Japan, Korea, Taiwan, and U.K.

• If the VCR beeps repeatedly, this means that:

– The G-CODE number is incorrect.
– ONCE, DAILY, or WEEKLY was selected incorrectly. You cannot select DAILY or

WEEKLY for a programme that airs more than seven days ahead.

Содержание SLV-X847ML













































































Результаты поиска

Содержание SLV-X847ML

Отзывы:

Похожие инструкции для SLV-X847ML

Бренды по названию

Популярные бренды

Sony SLV-X847ML, Руководство по эксплуатации

Результаты поиска

Содержание SLV-X847ML

Отзывы:

Похожие инструкции для SLV-X847ML

Бренды по названию

Популярные бренды