Basic Operations
35
Basic Operations
SLV-X827AS/NZ 3-858-668-11 (1)
To record the same programme every day or the same day every
week, press CURSOR
.
while the date is highlighted. For details,
see “Daily/weekly recording” on this page.
To record from a source connected to the LINE-1 IN or the LINE-2
IN jacks, press INPUT SELECT on the VCR to display “LINE1” or
“LINE2” in the “PROG” position.
3
Press CURSOR
/
to confirm the setting.
The cursor (
I
) appears at the beginning of the line. To enter another
setting, move the cursor to the next line and repeat step 2.
4
Press EXECUTE.
5
Press
u
to turn off the VCR.
The TIMER indicator appears in the display window and the VCR
stands by for recording.
To record from other equipment, leave the connected equipment
switched on.
• CURSOR
• EXECUTE
•
To stop recording
To stop the VCR while recording, press
p
STOP.
Daily/weekly recording
In step 2 above, press CURSOR
.
to select the recording pattern. Each time
you press CURSOR
.
, the indication changes as shown below. Press
CURSOR
>
to change the indication in reverse order.
the current date
n
SUN-SAT
n
MON-SAT
n
MON-FRI
n
EVERY SAT .....
n
EVERY MON
n
EVERY SUN
n
1 month later
n
(dates count down)
n
the current date
Tips
•
To set the programme position, you can also use the PROG +/– or programme
number buttons.
•
To set the tape speed, you can also use TAPE SPEED.
Note
• “TIMER” flashes in the display window when you press
u
with no tape inserted.
