Sony SLV-SE600B, Руководство по эксплуатации

Страница: 8 / 100

8
Setting up the remote commander
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find
the one that works with your TV.
To switch to wide mode, see the footnotes below this table for the applicable code
numbers.
* 1 Press WIDE to switch the wide picture mode on or off.
* 2 Press WIDE, then press
2
+/– to select the wide picture mode you want.
* 3 Press WIDE. The menu appears on the TV screen. Then, press
M
/
m
/
<
/
,
to select the
wide picture you want and press OK.
Tip
• When you set your TV’s code number correctly while the TV is turned on, the TV turns off
automatically.
Notes
• If you enter a new code number, the code number previously entered will be erased.
• If the TV uses a different remote control system from the one programmed to work with the
VCR, you cannot control your TV with the remote commander.
• When you replace the batteries of the remote commander, the code number may change. Set
the appropriate code number every time you replace the batteries.
Manufacturer Code number
Sony 01* 1 , 02
Akai 68
Ferguson 52
Grundig 10* 1 , 11* 1
Hitachi 24
JVC 33
Loewe 45
Mivar 09, 70
NEC 66
Nokia
15, 16, 69*
3
Panasonic 17* 1 , 49
Philips 06* 1 , 07* 1 , 08* 1
Saba 12, 13
Samsung 22, 23
Sanyo 25
Sharp 29
Telefunken 36
Thomson
43*
2
Toshiba 38
Manufacturer Code number