20
Setting up the VCR with the Auto Set Up function
Step 4 : Setting up the VCR with the Auto
Set Up function
Before using the VCR for the first time, set up the VCR using the Auto Set Up
function. With this function, you can set the language for the on-screen display, TV
channels, guide channels for the ShowView system*, and VCR clock* automatically.
1
Turn on your TV and set it to the video channel.
If your TV does not have a Scart (EURO-AV) connector, tune the
TV to channel 32 (the initial RF channel for this VCR). Refer to
your TV manual for TV tuning instructions. If the picture does not
appear clearly, see “To change the RF channel” on page 22.
2
Connect the mains lead to the
mains.
The VCR automatically turns on,
and the language abbreviations
appear on the TV screen.
The abbreviations of the
languages are as follows:
3
Press
M
/
m
/
<
/
,
to select the language abbreviation from the table
in step 2, then press OK.
The message for the Auto Set Up function appears.
G B
C Z
T R
R U
H U
P L
S K
E X I T
M E N U
:
O K
:
S E T
S E L E C T
:
Abbreviation
Country
Language
CZ
Czecho
Czech
HU
Hungary
Hungarian
PL
Poland
Polish
SK
Slovakia
Slovak
TR
Turkey
Turkish
RU
Russia
Russian
OK
