background image

Basic Operations

Basic Operations

31

TODAY 

n

 SUN-SAT (Sunday to Saturday) 

n

 MON-SAT (Monday to Saturday)

n

 MON-FRI (Monday to Friday) 

n

 SAT (every Saturday) .....

n

 MON (every Monday) 

n

 SUN (every Sunday) 

n

 1 month later

n

 (dates count down) 

n

 TOMORROW 

n

 TODAY

2

Set the date, start and stop times, and
programme position:

1

Press 

/

 to highlight each item in turn.

2

Press 

>

/

.

 to set each item.

To correct a setting, press 

?

 to return to

that setting and reset.

• To record the same programme every day or the same day every

week, see “Daily/weekly recording” below.

• To record from a source connected to the LINE-1 IN VIDEO/

AUDIO or LINE-2 IN VIDEO/AUDIO jacks, press INPUT
SELECT to display “L1” or “L2” in the “PROG.” position.

3

Press MENU to exit the menu.

4

Press 

I

/

u

 to turn off the VCR.

The 

 indicator appears in the display window and the VCR

stands by for recording.

To record from a source, leave the connected equipment switched
on.

To stop recording

To stop the VCR while recording, press 

p

 STOP.

Daily/weekly recording

In step 2 above, press 

.

 to select the recording pattern.  Each time you press

.

, the indication changes as shown below.  Press 

>

 to change the indication

in reverse order.

OK

PLAY

MENU

INPUT SELECT

continued

DATE

CANCEL

SET

:

:

SELECT :

CLEAR

MENU

EXIT

:

TIMER

LIST

TIME

PROG.

TODAY

5

1 9 : 0 0

2 0 : 0 0

3

TUE

2 8 . 9

Содержание SLV-SE30EE

























































Отзывы: