43
Recording TV programmes
B
a
si
c
Op
er
a
tio
n
s
filename[010bas.fm] model name1[SLV-SE250B] model name2[SLV-SE450B]
[3-868-346-E2 (1)]
To save a recording
To prevent accidental erasure, break off the safety
tab as illustrated. To record on the same tape
again, cover the tab hole with adhesive tape.
Tips
• To select a programme position, you can use the programme number buttons on the remote
commander. For two-digit numbers, press the
-
(ten’s digit) button followed by the
programme number buttons.
• If you connect additional equipment to the LIGNE-1 (TV) or ENTREE LIGNE-2 connector,
you can select the input signal using the CHOIX ENTREE or /– buttons.
• The
AFFICH information appears on the TV screen indicating information about the
tape, but the information won’t be recorded on the tape.
• If you don’t want to watch TV while recording, you can turn off the TV. When using a
decoder, make sure to leave it on.
Notes
• The
AFFICH information does not appear during still (pause) mode or slow-motion
playback.
• The
AFFICH information will not appear while playing an NTSC-recorded tape.
• If a tape has portions recorded in both PAL (SECAM, MESECAM) and NTSC systems, the
time counter reading will not be correct. This discrepancy is due to the difference between
the counting cycles of the two video systems.
• When you insert a non-standard commercially available tape, the remaining time may not be
correct.
• The remaining time is intended for rough measurement only.
• About 30 seconds after the tape begins playback, the tape remaining time will be displayed.
• The station name may not appear if the VCR does not receive station name information
signals.
* SLV-SE450B only
Safety tab
continued
010COV.book Page 43 Friday, April 14, 2000 1:07 PM
Содержание SLV-SE250B
Страница 82: ...82 Index to parts and controls ...
Страница 83: ...83 Index to parts and controls Additional Information ...
