background image

2

WARNING

WARNING

To prevent fire or shock hazard, do not expose the 
unit to rain or moisture.
To avoid electrical shock, do not open the cabinet. 
Refer servicing to qualified personnel only.

To prevent fire or shock hazard, do not place objects 
filled with liquids, such as vases, on the apparatus.

Mains lead must only be changed at a qualified 
service shop.

Notice for customers in the United 
Kingdom and Republic of Ireland

A moulded plug complying with BS1363 is fitted to 
this equipment for your safety and convenience.
Should the fuse in the plug supplied need to be 
replaced, a 3 AMP fuse approved by ASTA or BSI 

to BS1362, (i.e., marked with 

 or 

 mark) must 

be used.
If the plug supplied with this equipment has a 
detachable fuse cover, be sure to attach the fuse 
cover after you change the fuse. Never use the plug 
without the fuse cover. If you should lose the fuse 
cover, please contact your nearest Sony service 
station.

Precautions

Safety

• This unit operates on 220 – 240 V AC, 50 Hz. 

Check that the unit’s operating voltage is 
identical with your local power supply. 

• If anything falls into the cabinet, unplug the unit 

and have it checked by qualified personnel before 
operating it any further.

• The unit is not disconnected from the mains as 

long as it is connected to the mains, even if the 
unit itself has been turned off.

• Unplug the unit from the wall outlet if you do not 

intend to use it for an extended period of time. To 
disconnect the cord, pull it out by the plug, never 
by the cord.

Installing

• Do not install this equipment in a confined space 

such as a book or similar unit.

• Allow adequate air circulation to prevent internal 

heat buildup.

• Do not place the unit on surfaces (rugs, blankets, 

etc.) or near materials (curtains, draperies) that 
may block the ventilation slots.

• Do not install the unit near heat sources such as 

radiators or air ducts, or in a place subject to 
direct sunlight, excessive dust, mechanical 
vibration or shock.

• Do not install the unit in an inclined position. It is 

designed to be operated in a horizontal position 
only.

• Keep the unit and cassettes away from equipment 

with strong magnets, such as microwave ovens or 
large loudspeakers.

• Do not place heavy objects on the unit.
• If the unit is brought directly from a cold to a 

warm location, moisture may condense inside the 
VCR and cause damage to the video head and 
tape. When you first install the unit, or when you 
move it from a cold to a warm location, wait for 
about three hours before operating the unit.

Caution

Television programmes, films, video tapes and other 
materials may be copyrighted. Unauthorized 
recording of such material may be contrary to the 
provisions of the copyright laws. Also, use of this 
recorder with cable television transmission may 
require authorization from the cable television 
transmitter and/or programme owner.

Compatible colour systems

This VCR is designed to record and play back using 
the PAL colour system. Recording of video sources 
based on other colour systems cannot be guaranteed.

VIDEO Plus+ and PlusCode are registered 
trademarks of Gemstar Development Corporation. 
The VIDEO Plus+ system is manufactured under 
license from Gemstar Development Corporation.

Disposal of Old Electrical & Electronic 
Equipment (Applicable in the European 
Union and other European countries with 
separate collection systems)

This symbol on the product or on its packaging 
indicates that this product shall not be treated as 
household waste. Instead it shall be handed over to 
the applicable collection point for the recycling of 
electrical and electronic equipment. By ensuring 
this product is disposed of correctly, you will help 
prevent potential negative consequences for the 
environment and human health, which could 
otherwise be caused by inappropriate waste 
handling of this product. The recycling of materials 
will help to conserve natural resources. For more 
detailed information about recycling of this 
product, please contact your local city office, your 
household waste disposal service or the shop where 
you purchased the product.

Содержание SLV-SE240G

















































































Отзывы: