Sony SLV-SE230B, Руководство по эксплуатации

Страница: 14 / 80

14 Setting up the remote commander
Notes
• With normal use, the batteries should last about three to six months.
• If you do not use the remote commander for an extended period of time, remove
the batteries to avoid possible damage from battery leakage.
• Do not use a new battery together with an old one.
• Do not use different types of batteries together.
• Some buttons may not work with certain Sony TVs.
* 1 SLV-SE830B only
* 2 not available on SLV-SE230B
Controlling other TVs with the remote commander (SLV-
SE830B only)
The remote commander is preprogrammed to control non-Sony TVs. If your
TV is listed in the following table, set the appropriate manufacturer’s code
number.
* These buttons may not work with all TVs.
Switch to Teletext* 1
/
(Teletext)
Select the sound*
2 CHOIX SON
Use FASTEXT* 1 FASTEXT buttons
Call up the on-screen display
AFFICH
Change the Teletext page* 1
c
⁄
C
Switch to/from wide mode of a Sony wide TV (For
other manufactures’ wide TVs, see “Controlling
other TVs with the remote commander (SLV-
SE830B only)” below.)
(wide)
1
Set
[TV]
/
[MAGN]
at the top of the remote commander to
[TV]
.
2
Hold down ? / 1 , and enter your TV’s code number using the programme
number buttons. Then release
?
/
1
.
Now you can use the following TV control buttons to control your TV:
?
/
1
,
t
TV/MAGN, programme number buttons,
-
(ten’s digit),
/–, 2 +/–,
a
(TV),
/
(Teletext), FASTEXT buttons,
(wide)*, MENU*,
M
/
m
/
<
/
,
*, and OK*.
To Press