62
Editing
Audio dubbing (continued)
To stop while recording
Press the
p
STOP buttons on this VCR and the stereo system (or other VCR).
To listen to both the hi-fi and normal audio
Set AUDIO MIX to ON in the SET UP MENU (page 58). Use this feature to
listen to dubbed audio over the original hi-fi audio. When AUDIO MIX is
set to ON, the AUDIO MONITOR button does not function. Remember to
reset AUDIO MIX to OFF after playing the tape.
To listen to the dubbed sound (normal audio)
Press AUDIO MONITOR until the “L,” “R,” and “STEREO” indicators go off
in the display window.
Audio dubbing from the microphone
Using the microphone, you can add songs or narration on a recorded
tape. Sound from the microphone is mixed with the original hi-fi sound
and recorded on the normal audio track.
Before you start dubbing
• Connect the microphone(s) to the MIC IN 1 and/or 2 jack(s), and turn
on the microphone(s).
COUNTER
RESET
AUDIO DUB
P
PAUSE
KARAOKE ON/OFF
Microphone
MIC IN 1/2
1
Set KARAOKE ON/OFF to ON.
2
Insert the prerecorded tape into the VCR. Search for the end of the
section to be replaced and press
P
PAUSE.
Make sure that the tape has its safety tab in place.
3
Press COUNTER RESET to reset the counter to “0H00M00S.”
4
Rewind the prerecorded tape to the beginning of the section to be
replaced.
The VCR pauses.
1
2
3
4
5
6
7
8
9
0
