manualshive.com logo in svg

Sony SLV-ED100ME, Руководство по эксплуатации

Поделиться
Скачать
Sony SLV-ED100ME Скачать руководство пользователя страница 79

79

Additional Information

Recor

ding

Timer r

ecor

ding

Playback

Symptom

The picture rolls vertically
during picture search.

The picture has no sound.

The sound is unstable or ha

s 

an

echo.

No TV programmes appear
on the TV screen.

TV reception is poor.

The recorded picture has no
colour or unusual colours.

The tape starts playing as soon
as it is inserted.

The tape is ejected when you
press 

r

 REC.

Nothing happens when you
press 

r

 REC.

The timer does not operate.

Remedy

• Adjust the vertical hold control on the TV or monitor.

• The tape is defective.
• If you made A/V connections, check the audio cable

connection.

• When you play a tape with the same sound recorded

on both the hi-fi and normal sound tracks, make sure
AUDIO MIX in the SET UP MENU is set to OFF.

• Make sure the TV is set to the video channel.  If you

are using a monitor, set it to video input.

• Select the correct source with the INPUT SELECT or

PROG +/– buttons.  Select a programme position
when recording TV programmes; select “LINE 1,”
“LINE 2,” or “LINE 3”  when recording from other
equipment.

• Adjust the TV aerial.
• Make sure SYSTEM (BG, DK, I, or M) in the TUNER

PRESET menu is set to the system of your area.

• Set PAL/MESECAM in the SET UP MENU according

to your local colour system.

• The safety tab has been removed.  To record on this

tape, cover the tab hole.

• Check that the safety tab has not been removed.

• Make sure the tape is not at its end.

• Check that the clock is set.
• Make sure a tape has been inserted.
• Check that the safety tab has not been removed.
• Make sure the tape is not at its end.
• Make sure a programme has been set for timer

recording.

• Make sure your timer settings are past the current

time.

• Check that the satellite tuner is turned on.
• The clock stops if the VCR is disconnected from the

mains for more than eight hours (24 hours for SLV-
ED100ME).  Reset the clock and timer.

continued

Содержание SLV-ED100ME

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды