Sony SLV-E380EG ShowView, Руководство по эксплуатации

Страница: 24 / 60

Getting Started
23
Getting Started
5
Select CHANNEL SET, then press
?
/
/
repeatedly to tune the VCR to
the satellite tuner.
The channel number displayed beside CHANNEL SET is used for
receiving all satellite broadcasts from the satellite tuner.
6
Press PROG +/– to select another programme position for the next
satellite channel, and press the programme number buttons to enter the
same channel number as the one displayed in step 5.
Repeat this step for all satellite channels.
7
Set the guide channel number for each programme position assigned to
the satellite channel, following the procedures on pages 21 and 22.
Notes
• The menu disappears automatically if you don’t proceed for more than a few
minutes.
• If you use a satellite tuner connected via the LINE-1 (TV) connector, you don‘t have
to set up ShowView. Just record a satellite programme using ShowView, and the
VCR automatically records the programme from the LINE-1 (TV) connector.
• If you inadvertently entered a guide channel number, press CLEAR.
• The VCR does not allow entering the guide channel number if the same number has
been set.
• When you record a satellite broadcast using ShowView, you need to select the
desired channel on the satellite tuner manually.
T U N E R P R O G 6
S Y S T E M [ D / K ]
N O R M A L / C A T V [ C A T V ]
C H A N N E L S E T [ S 3 0 ]
A F T [ O N ]
F I N E T U N I N G
S E L E C T :
V v
S E T :
B b