Sony SLV-E130AE1, Руководство по обслуживанию

Страница: 2 / 130

– 2 –
SPECIFICATIONS
System
Channel coverage
• SLV-E130/E230AE/E230CP/E230VP/
E285VC/E295CP/E295VC/E430AE/E430CP/
E430VC/E430VP/E530CP/E530VC:
PAL (B/G)
VHF E2 – E12
(VHF Italian channel A to H)
UHF E21 – E69
CATV S01 – S05, S1 – S20
HYPER S21 – S41
• SLV-E177/E180/E380/E477/E480:
PAL (D/K, B/G)
VHF R1 – R12, E2 – E12
UHF R21 – R69, E21 – E69
CATV S01 – S05, S1 – S20
HYPER S21 – S41
• SLV-E230EY:
PAL (I)
VHF A-J
UHF B21 – B69
CATV S01 – S05, S1 – S20
HYPER S21 – S41
• SLV-E230UY/E295UX/E530UX:
PAL (I)
UHF B21 – B69
• SLV-E285B/E430B/E530B:
PAL (B/G)
VHF E2 – E12
(VHF Italian channel A to H)
UHF E21 – E69
CATV S01 – S05, S1 – S20
HYPER S21 – S41
SECAM (L)
VHF F2 – F10
UHF F21 – F69
CATV B – Q
HYPER S21 – S41
RF output signal
UHF channels 21 – 69
Aerial out
75-ohms asymmetrical aerial socket
Inputs/outputs
• SLV-E130/E177/E180EG/E230EY/E230UY/
E380EG/E477/E480EG:
Ú
LINE-1 (TV)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
• SLV-E180EE/E380EE/E480EE:
LINE-1 IN
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO IN, phono jack (1)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
LINE-2 IN (SLV-E380EE)
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO IN, phono jack (1)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
LINE OUT
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO OUT, phono jack (1)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
• SLV-E230AE/E230CP/E230VP/E285VC/
E430AE/E430CP/E430VC/E430VP:
Ú
LINE-1 (TV)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
DECODER/
…
LINE-2 IN (SLV-E230CP,
E285VC, E430VC/CP)
Ú
LINE-2 (SLV-E430AE/VP)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
• SLV-E285B/E430B:
Ú
LINE-1 (TV)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
DECODER/
…
LINE-2 IN
21-pin
Video input: pin 20
Audio input: pins 2 and 6
• SLV-E295CP/E295VC/E530B/E530CP/
E530VC:
Ú
LINE-1 (TV)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
DECODER/
…
LINE-3 IN
21-pin
Video input: pin 20
Audio input: pins 2 and 6
LINE-2 IN
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO IN, phono jack (1)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
• SLV-E295UX/E530UX:
Ú
LINE-1 (TV)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
…
LINE-3 IN
21-pin
Video input: pin 20
Audio input: pins 2 and 6
LINE-2 IN
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO IN, phono jack (1)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
General
Power requirements
220 – 240 V AC, 50 Hz
Power consumption
20W
Operating temperature
5 ˚C to 40 ˚C
Storage temperature
–20 ˚C to –60 ˚C
Dimensions
Approx. 355
×
96
×
285 mm (w/h/d)
including projecting parts and controls
Mass
Approx. 3.9 kg
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Design and specifications are subject to change
without notice.
SAFETY CHECK-OUT
1. Check the area of your repair for unsoldered or poorly-sol-
dered connections. Check the entire board surface for solder
splashes and bridges.
2. Check the interboard wiring to ensure that no wires are
“pinched” or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly transis-
tors, that were installed during a previous repair. Point them
out to the customer and recommend their replacement.
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer:
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK ! OR DOTTED
LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS
AND IN THE PARTS LIST ARE CRITICAL TO SAFE
OPERATION. REPLACE THESE COMPONENTS WITH
SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB-
LISHED BY SONY.
4. Look for parts which, though functioning, show obvious signs
of deterioration. Point them out to the customer and recom-
mend their replacement.
5. Check the B+ voltage to see it is at the values specified.