Sony SLV-E120AE, Руководство по обслуживанию, Страница: 32 / 69

5-17
3-10.L GUIDE LEVER ASSEMBLY AND
LOAD LEVER ASSEMBLY
(See Figs. 3-10-1 )
1) Refer to section 3-3 and remove the cassette mecha-
nism assembly.
2) Refer to sections 3-9-1 and 3-9-2, then remove the
pinch roller lever assembly and the opener mounting.
3) After removing the washer
4
, remove the L guide act
lever assembly
5
.
4) Remove the special nut
6
, then remove the load lever
assembly
7
and the L guide lever spring
8
.
ASSEMBLY NOTES:
1) Apply grease (VHJ-0100) to the toothed area
A
of the
L guide act lever assembly
5
and around the shafts
9
and
0
.
2) Refer to section 4-3 and adjust the height of the load
lever assembly.
3) Hook the L guide lever spring
8
into the stopper
!£
and load lever assembly
7
shown in Fig. A.
4) Put the pin
!¡
of the L guide act lever assembly into the
cam groove
!™
of the crescent slide.
7
Load lever assembly
8
L guide lever spring
4
Washer
5
L guide
act lever
assembly
8
L guide lever spring
6
Special nut
7
Load lever
assembly
!¡
Pin
0
Shaft
9
Shaft
A
!£
Stopper
!™
Cam groove
Fig. A
Fig.3-10-1
3-11.BT LEVER ASSEMBLY
(See Fig. 3-11-1 )
1) Refer to section 3-2 and remove the mechanism unit.
2) Refer to section 3-3-1 and remove the cassette mecha-
nism assembly.
3) Remove the BT spring
1
.
4) Remove the clamp
2
on the underside of the mecha-
nism chassis, then remove the BT lever assembly
3
.
5) Remove the clamp
5
on the band brake assembly
4
.
Then, as shown in Fig. A, align the other end of the
band brake assembly with the protruding parts of the
BT lever assembly
3
before removing it.
ASSEMBLY NOTES:
1. When fitting the BT lever assembly
3
, be careful not to
bend the stopper
6
or the S incline mounting assembly
7
out of shape by knocking it against them.
2. Hook the long hook of the BT spring
1
into the BT
Iever assembly
3
, as shown in Fig. B.
3. After assembly. make sure that the mountings on both
ends of the band brake assembly
4
are positioned as
shown in Fig. C.
4. After assembly, refer to section 4-2-1, and make the
appropriate adjustment.
Protruding
parts
2
Clamp
5
Clamp
6
Stopper
7
S incline
mounting
assembly
1
BT spring
4
Band brake
assembly
3
BT lever
assembly
Fig. A
Fig. B
Fig. C
Fig. 3-11-1