Sony SLV-AX10 - Video Cassette Recorder, Руководство по эксплуатации

Страница: 66 / 84

66
Searching for a selected point on the tape (SLV-N60/AX20 only)
To cancel searching
Press H PLAY or x STOP.
To turn off the bar indication
Press DISPLAY again.
Notes
• The figure on the bar indication represents the total time length of the inserted tape as shown
below.
The total time length may not be displayed correctly for:
– Tapes other than T-60, T-120, or T-160.
– Tapes recorded in more than one tape speed mode.
• If you move the pointer ( F ) on the bar indication while searching, the VCR searches for the
new reset point.
• With the bar indication on, the
M
FF/
,
and
m
REW/
<
buttons on the remote
commander work only for moving the pointer (
F
), while the
M
FF and
m
REW
buttons on the VCR are used for normal tape operation. Note, however, if you press these
buttons on the VCR, searching is canceled.
2
Press
<
/
,
to move the pointer (
F
) to the point
where you want to start playback.
The VCR starts searching and the cursor (
x
)
moves toward the pointer. When the VCR locates
the marked point, playback starts.
Tape type
Total time length
SP LP EP
T-60 or shorter 60 120 180
from T-80 to T-140 120 240 360
T-160 or longer 160 320 480
0 1 2 0