SEL18200 (E 18-200mm F3.5-6.3 OSS)
2-2
HELP
Note for assembling and grease applying positions are shown.
HELP03
HELP01
HELP02
Grease (SG-310): 9-913-200-36
Apply grease (SG-310) to GP Mount. (3 places)
Adhesive bond: LOCTITE 460
Note:
Use adhesive bond (LOCTITE 460) or the equivalent.
Do not use the type of adhesive bond such as instant glue, which makes the surface get white after drying.
Apply adhesive bond (LOCTITE 460) on the tip of the stopper screw, and tighten it to GP Mount.
Make folding marks on the flexible board of Contact Block Assy at where is indicated below.
When removing GP Mount, be sure to disconnect the flexible board of Contact Block Assy before.
GP Mount
Apply grease
(SG-310)
Contact Block Assy
GP Mount
Mountain Folding
Valley Folding
Apply adhesive bond (LOCTITE 460)
GP Mount
