– 13 –
SDM-HS95P (E)
SERVICE OSD
To enter service OSD menu,
1) Turn off the power switch button.
2) Press Ågvolume downÅh button and Ågpower buttonÅh at the same time.
3) Shows the service OSD menu. That menu is shown at the down side of main menu.
4) The service OSD menu contains additional menus as followings.
1. COLOR TEMP: Adjust R/G/B color values of contrast and brightness in 9300K, 6500K and sRGB.
2. INITIAL EEPROM: Initialize the EDID DATA at DDC2B EEPROM is saved system memory.
3. CLEAR ETI: Initialize the used time of MFT.
4. AGING: Select aging mode. (on/off)
5. WHITE BALANCE: White balance adjustment
6. DEFAULT TIMING: Select default resolution timing.
7. MODULE: Select the module type.
