How to switch
Note
When updating the software of the monitor, connect the computer with the setting software installed to this monitor via USB, and
set [KVM switch 1]/[KVM switch 2] correctly.
The KVM switch can be set only when [Power saving] is set to [Off].
Hint
To control the selection of input devices, connecting a computer or game console to this monitor with a USB cable is required.
Related Topic
G-909-100-11(1) Copyright 2022 Sony Corporation
Select the input of the device to be assigned to [KVM switch 2], then press the joystick. (In the case of the above
figure, select [DP sync].)
The device is assigned to [KVM switch 2]. (In the above figure, a computer connected to the DisplayPort terminal is
applicable.)
5.
Press the joystick on the rear of the monitor, move it left to select
[Input], then press it.
1.
Select the input assigned to [KVM switch 1] or [KVM switch 2].
You can operate the selected device with the USB device connected to this monitor.
2.
31