Sony SCD-C555ES - Super Audio Cd Скачать руководство пользователя

Страница: 65 / 94

SCD-C555ES

Items

Description

Remarks

HENSIN

Eccentricity measurement

For the CD only are measured

Eccentricity (actual eccentric amount) of disc, disc pulley total

• Read by dividing by 10
• 0 may be displayed if eccentricity

is small (10um or less) (Due to
measurement reason)

SPIN DOWN TIME (msec)

Time from spindle brake application to rotation stop

FG (IC901 pin

) monitoring

LOAD OUT TIME (msec)

Time until loading table comes out from the state where a disc is in chuck

Loading out switch H

Measured Data Reading Method:

To judge the check result, the measured data must be read.
1. When “AUTO CHECK OK” is displayed, rotate the

[ AMS ]

dial clockwise by 2 clicks.

2. When “13. DISP RSLT?” is displayed, press the

[ AMS ]

dial to enter.

3. “PLEASE WAIT” will be displayed and in several seconds, “13. DISP RESULT” will be displayed.
4. Rotate the

[ AMS ]

dial clockwise by 1 click, and the “LOAD IN” will be displayed.

5. Press the

[ AMS ]

dial to enter. The LOAD IN TIME measured value will be displayed.

6. Compare the displayed value with the following specified value.
7. Hence, repeat step 4 to 6 (display is variable) and read the measured data respectively.
8. Compare the measured data with the specified value to check for NG item.

Note:

Blank display of measured value means that an error occurred during the checking or no measurement was taken place.

Specified Value:

(1) SACD (Use the test disc SATD-S5 or SATD-S4)

Note:

Measured values in check items are typical ones.

Check items

Specified value

LOAD IN TIME (msec)

Not displayed in this set.

SPIN UP TIME (msec)

: 1652

3000 msec or less

RF/VC/FE/TE AVRG (ORG)

: 98, C, 1DE, 0

RF: 80-9E, VC: 1F1-10, FE: 1B8-42, TE: 1BB-5C

RF/VC/FE/TE AVRG (ADJ)

: 9F, C, 4, 0

RF: 98-A5, VC : 1F1-10, FE: 1F1-10, TE: 1F1-10

PI/TRVS PP (ORG/ADJ)

: 81, 131, 78, 105

PI ORG: 70-89, PI ADJ: 122-135, TRVS ORG: 68-114, TRVS ADJ: 55-100

PIOR/CCR/TRCR

: 1A, 31, 1F

No specified value given

FOCUS/TRK GAIN

: 2E, 24

FOCUS: 10-40, TRK: 10-40

FBIAS/TRVSC/TRCR2/CFR

: 2,13, 6, 60

F.BIAS: 1D0-4F, TRVSC: 1D0-30 TRCR2, CFR: no specified value given

READ TOC TIME (msec)

: 1283

2200 msec or less

PSP AMPLITUDE

: 1666

1300 or above

1/3 SEEK TIME
F) AVE/MIN/MAX (msec)

: 967, 928, 990

AVE: 1100 msec or less, MAX: 1300 msec or less

R) AVE/MIN/MAX (msec)

: 974, 933, 993

AVE: 1100 msec or less, MAX: 1300 msec or less

1/MAX SEEK TIME
F) AVE/MIN/MAX (msec)

: 1958, 1938, 1968

AVE: 2200 msec or less, MAX: 2500 msec or less

R) AVE/MIN/MAX (msec)

: 1915, 1909, 1935

AVE: 2200 msec or less, MAX: 2500 msec or less

ERROR RATE
PO MAX/AVE FRAME

: 0, 0

No specified value given

PO MAX/AVE NUM

: 160, 3

MAX: 1000 or less, AVE: 100 or less

PI1 MAX/AVE FRAME

: 0, 0

No specified value given

PI1 MAX/AVE NUM

: 242, 17

MAX: 1000 or less, AVE: 100 or less

PI2 MAX/AVE FRAME

: 0, 0

No specified value given

PI2 MAX/AVE NUM

: 128, 2

MAX: 1000 or less, AVE: 100 or less

SPIN DOWN TIME (msec)

: 1342

2500 msec or less

LOAD OUT TIME (msec)

Not displayed in this set.

* Items are not used in the

SATD-S5.

Содержание SCD-C555ES - Super Audio Cd































































































Результаты поиска

Содержание SCD-C555ES - Super Audio Cd

Отзывы:

Похожие инструкции для SCD-C555ES - Super Audio Cd

Бренды по названию

Популярные бренды

Sony SCD-C555ES - Super Audio Cd, Руководство по обслуживанию

Результаты поиска

Содержание SCD-C555ES - Super Audio Cd

Отзывы:

Похожие инструкции для SCD-C555ES - Super Audio Cd

Бренды по названию

Популярные бренды