SERVICE MANUAL
SPECIFICATIONS
SA-WSIS10/SS-IS10
9-887-731-04
2008L05-1
© 2008.12
Sony Corporation
Audio&Video Business Group
Published by Sony Techno Create Corporation
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Chinese Model
•
SA-WSIS10 is the amplifier and active subwoofer
section in DAV-IS10.
•
SS-IS10 is the front/center/surround speakers in
DAV-IS10
•
In SA-WSIS10, repair in the state of having
connected with HCD-IS10.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must
be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is
prohibited.
This system incorporates with Dolby* Digital and Dolby Pro Logic (II) adaptive matrix surround decoder and the DTS** Digital Surround System.
*
Manufactured under license from Dolby Laboratories.
“Dolby,” “Pro Logic,” and the double-D symbol are trademarks of Dolby Laboratories.
**
Manufactured under license from DTS, Inc. “DTS” and “DTS Digital Surround” are registered trademarks of DTS, Inc.
Amplifier section (SA-WSIS10)
Power output and total harmonic distortion
(FTC Output Power)
for the US model
Front L / Front R:
With 10 ohms loads, both
channels driven, from 800 -
20,000 Hz; rated 35 watts
per channel minimum
RMS power, with no more
than 0.7 % total harmonic
distortion from 250 milli
watts to rated output
Subwoofer:
With 4 ohms loads, from 30
- 800 Hz; rated 75 watts per
channel minimum
RMS power, with no more
than 0.7 % total harmonic
distortion from 250 milli
watts to rated output
Power output (rated)
for the except US and Chinese models
Front L / Front R (rated): 35 W + 35 W (at 10 ohms,
1 kHz, 1 % THD)
RMS output power (reference)
for the except Chinese model
Front L / Front R*:
50 W + 50 W
(at 10 ohms, 1 kHz, 10 %
THD)
Center*:
50 W
(at 10 ohms, 1 kHz, 10 %
THD)
Surround L / Surround R*: 50 W + 50 W
(at 10 ohms, 1 kHz, 10 %
THD)
Subwoofer*:
100 W (at 4 ohms, 70 Hz,
10 % THD) + 100 W (at 4
ohms, 500 Hz, 10 % THD)
for the Chinese model
Front L / Front R:
30 W + 30 W
Center*:
30 W
Surround L / Surround R: 30 W + 30 W
Subwoofer*:
75 W + 75 W
* Depending on the sound field settings and the source, there
may be no sound output.
Inputs (Analog)
TV (AUDIO IN)
Sensitivity: 450/250 mV
Inputs (Digital)
SAT/CABLE (COAXIAL IN)
Impedance: 75 ohms
Front/Center/Surround (SS-IS10)
Speaker system
Full range speaker system
Speaker unit
35 mm (1
7
/
16
inches)
Rated impedance
10 ohms
Dimensions (approx.)
45
×
55
×
40 mm
(1
13
/
16
×
2
1
/
4
×
1
5
/
8
inches) (w/h/d)
Mass (approx.)
0.07 kg (3 oz)
Speaker cords
4.5 m
×
2, 3 m
×
1, 12 m
×
2 (14.7 ft.
×
2, 9.8 ft.
×
1,39.3 ft.
×
2)
Photo: SA-WSIS10
Photo: SS-IS10
Subwoofer (SA-WSIS10)
Speaker system
2 Way 2 Drivers
Subwoofer speaker system
Speaker unit
120 mm + 160 mm (4
3
/
4
6
3
/
8
inches)
Rated impedance
4 ohms
Dimensions (approx.)
190
×
450
×
450 mm
(7
1
/
2
×
17
3
/
4
×
17
3
/
4
inches) (w/h/d)
Mass (approx.)
13.5 kg (29 lb 13 oz)
Power requirements
Latin America models
except Argentina:
110 – 240 V AC, 50/60 Hz
US and Canadian models:
120 V AC, 60 Hz
Taiwan model: 120 V AC,
50/60 Hz
Chinese and Thai models:
220 V AC, 50/60 Hz
Other models: 220 – 240 V
AC, 50/60 Hz
Power consumption
On: 130 W
Standby: 0.3 W (at the
Power Saving mode)
Design and specifications are subject to change without
notice.
SA-WSIS10
ACTIVE SUBWOOFER
SS-IS10
SPEAKER SYSTEM
