— 36 —
OSD Color Burst Adjustment
Connection:
Connection 1:
Vectorscope
set
MONITOR OUT
Connection 2:
Monitor
Vectorscope
Monitor
VTR etc.
set
VIDEO 1 IN
MONITOR OUT
Method 1:
1. Without anything connected to the external input terminal (con-
nection 1), press the SYSTEM POWER button and turn ON the
power.
2. Check that the OSD function frame screen is displayed on the
monitor. If no OSD function frame screen is displayed, move the
cursor button of the remote commander provided to display the
screen.
3. Observe the vectorscope, and adjust RV601 of the MAIN board
so that the light dots converge in the BLUE area.
4. Connect a dynamic picture video device to the external input ter-
minal (VIDEO 1 IN jack) of this unit (Connection 2).
5. Press the FUNCTION button and set the input source to
6. Move the cursor of the remote commander provided, and display
7. Observe the vectorscope. Check that the light dots in the BLUE
range and the light dots adjusted at 3 are coinciding.
8. If they do not coincide, disconnect the external video device, and
adjust RV601 of the MAIN board again.
9. If the light dots when an external video device is connected and
not connected coincide, it indicates the end of the adjustment.
Method 2: (When no vectorscope is used)
Connection:
Monitor
VTR etc.
set
VIDEO 1 IN
MONITOR OUT
1. Connect a dynamic picture video device to the VIDEO 1 IN jack
of the unit.
2. Press the FUNCTION button, and set the input source to
VIDEO 1.
3. Move the cursor of the remote commander provided, and display
the OSD function frame.
4. Take note of the blue and green screens at the bottom left of the
OSD function frame.
5. Disconnect the video device connected at 1.
6. Adjust RV601 of the MAIN board so that the blue and green parts
at the bottom left of the OSD function frame to the same color as
the images checked at 4.
OSD function frame
Blue and green parts of the frame
Note)
Perform this adjustment when disconnecting the external video de-
vice. If the external video device is connected, there is no meaning in
performing this adjustment due to the use of the color burst of the
external device instead of the internal sync signal.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
