18
GB
To operate the unit via a home
network
When you want to operate the unit via a home
network, set the STANDBY MODE switch to
NETWORK STANDBY (network standby
mode) so it can be controlled from a controller
on the network. The unit turns on
automatically when the controller delivers
audio content to this unit.
Tip
Keep this unit in the network standby mode even
when you are not currently operating this unit.
To operate the unit as a general
active speaker
You can use this unit as a general active
speaker without connecting to a home
network, set the STANDBY MODE switch to
STANDBY (standby mode).
Turning the Unit On
Set the OPERATE ON/OFF switch
to ON.
The
?
/
1
(ON/Standby) indicator flashes in
green and the illumination indicator lights.
You can operate this unit when the
?
/
1
(ON/
Standby) indicator lights in green and the
illumination indicator lights. It may take a
while.
The unit enters the selected standby mode in
“Setting the standby mode” (page 18) when it
is idle for 30 minutes.
If the unit is being discharged and it is idle for
another 30 minutes in the network standby
mode, the unit enters another standby mode
that saves the battery life.
Tip
The STANDBY MODE switch is set to STANDBY
in the factory default settings.
To resume power from the
network standby mode or the
standby mode
Press the
?
/
1
(ON/Standby) button.
The
?
/
1
(ON/Standby) indicator lights up in
green and the illumination indicator lights up.
To turn the unit off
Set the OPERATE ON/OFF switch to OFF
when you need to turn the unit off, such as
when you do not use for a long time.
When the unit is not connected to the AC
adaptor, set the OPERATE ON/OFF switch to
OFF in order to avoid discharging the battery.
Setting the standby mode
