10
GB
– When the remote control will not be used for a
long period of time, remove the battery from the
remote control to prevent leaking and corrosion.
– Incorrectly inserting, shorting, dismantling, or
heating the battery, or throwing it into a fire
may cause the battery to rupture or leak.
Turning the photo frame
on
Turning on the power
Press
1
(on/standby) on the photo frame to
turn on the power. The standby indicator turns
to green from red
.
The Sony logo on the front
panel lights up.
Using the remote control
You can turn on/off the photo frame with the
1
(on/standby) button on the remote control.
When using the photo frame
with the built-in battery pack
Turn on the photo frame with the
1
(standby)
button on the photo frame.
If the photo frame is powered only by the built-
in battery pack, the
1
(standby) button on the
remote control does not operate.
Turning off the power
Hold
1
(on/standby) on the photo frame until
the power turns off. The standby indicator turns
to red from green
.
Note
Do not turn the photo frame off or disconnect the AC
adaptor from an AC outlet or the photo frame. Doing
so may damage the photo frame.
Содержание S-Frame DPF-D830
Страница 54: ...Sony Corporation ...