background image

— 20 —

KV-20S90 / 21SE43C

V. SIZE ADJUSTMENT (VSIZ)

1.  Input a crosshatch signal.

2.  Activate the Service Adjustment Mode.

3.  Select the VSIZ item with  1  and  4  .

4.  Adjust value of VPOS with  1  and  4  for the best vertical center.
5.  Press  MUTING  then  ENTER  to save into the memory.

 

V. CENTER ADJUSTMENT (VPOS)

1.  Input a crosshatch signal.

2.  Set to Service Adjustment Mode.

3.  Select the VPOS item with  1  and  4  .

4.  Adjust value of VPOS with  3  and  6  for the best vertical center.

5.  Press  MUTING  then  ENTER  to save into the memory.

H. CENTER ADJUSTMENT (HPOS)

Perform this adjustment after performing H. Frequency.
1.  Input a crosshatch signal.

2.  Set to Service Adjustment Mode.

3.  Select the HPOS item with  1  and  4  .

4.  Adjust the value of HPOS with  3  and  6  for the best horizontal center.

5.  Press  MUTING  then  ENTER  to save into the memory.

V. LINEARITY (VLIN), V. CORRECTION 

1.  Input a crosshatch signal.

2.  V.Correction is automatically adjusted from the circuit and should 

satisfy the conditions below.

V LINEARITY (VLIN)

V CORRECTION 

SERVICE ADJUSTMENT MODE MEMORY

1.  Change the value of the DCOL item to 1.

2.  After completing all adjustments, press  0  then  ENTER  .

Read From Memory

Green

Red

ENTER

0

Mode

SERVICE

READ

Содержание RM-Y155







Отзывы: