Sony RM-AV2500T, Руководство по эксплуатации

Страница: 39 / 140

39
GB
7
Press the “ENTER” key.
When the data has been transferred,
“TV” and “
R ” go off. If the data have
been successfully transferred, the
backlight of the display turns off.
Note
If “NG” appears while sending the data, go
back to Step 6 and continue the operation
or press COMMANDER OFF to stop the
operation.
Notes
• The data of the “learned” signal and the
System Control function programmed for a
Component Select button cannot be
transferred.
You can use the learning function (page 32) to
programme the “learned” signal and the
System Control functions programmed for a
Component Select button on another remote
commander.
• Be sure that the receiving remote commander
is ready to receive data.
To transfer the data of a
Component Select button
The data of a Component Select button
on this Commander (the settings and
learned signals programmed on the keys
and buttons) can be transferred to a
Component Select button on another
Sony RM-AV2500T.
1~3
Perform Steps 1 to 3 on page
38.
4
Press the 2 key.
5
Press the Component Select
button whose data you want to
send.
6
Confirm that the receiving remote
commander is ready to accept
data.
(To set the receiving commander,
follow the procedure on page 40.)
Continued