manualshive.com logo in svg

Sony RM-AV2500 - Integrated Remote Commander, Руководство по эксплуатации

Поделиться
Скачать
Sony RM-AV2500 - Integrated Remote Commander Скачать руководство пользователя страница 14

14

Notes on operating your
components

About the input select of a TV

The component code “8077” is the preset
code number for the input select of a
Sony TV. You can set this code number
for an infrequently used Component
Select button.
Follow the procedure on page 8 for the
input select setting.

“0” : TV tuner
“1” : VIDEO1
“2” : VIDEO2
“3” : VIDEO3
“4” : VIDEO4
“5” : VIDEO5
“6” : VIDEO6
“7” : HD1
“8” : HD2
“9” : HD3

This setting can be used for
programming the SYSTEM CONTROL
buttons (page 41).

Operating Your Components with
the Remote Commander
(continued)

To control the volume

Press the /– buttons to
control the volume, and the MUTING
button to mute. When you select a visual
component, the TV’s volume will be
controlled, and when you select an audio
component, the amplifier’s volume will
be controlled. You can change this setting
also (page 21).

Notes

• If you have programmed any signal for the

VOLUME or MUTING button for any
component using the learning function (page
15), that signal will be transmitted instead of
controlling the volume of the TV or amplifier
once you select that component.

• If you have programmed any signal for the

VOLUME or MUTING button of TV or AMP
using the learning function, that signal will
be transmitted only after you select TV or
AMP. When you select another components,
the preset volume control signals for TV or
AMP will be transmitted at that time.

• If you have assigned another component to

the TV or AMP button, the volume of the TV
or amplifier cannot be controlled even when
you select other components.

Содержание RM-AV2500 - Integrated Remote Commander













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды