Sony RM-916, Руководство по обслуживанию

Страница: 29 / 138

–
29
–
KV
-ES29M90
RM-916
45
Additional Information
continued
• Press ¸ + to increase the volume
level.
• Press ¤ to cancel the muting.
• Press A/B until a better sound is
heard.
• Set “DIGITAL IN: OFF” in the “A/V
CONTROL” menu and connect L
and R (component video input) on your
TV to receive analog audio signals.
• When connecting to (component
video input) on your TV, set “DIGITAL
IN: ON” to receive digital audio signals
through
DIGITAL IN, or set
“DIGITAL IN: OFF” to receive analog
audio signals through
L and R.
• Do not use a hair dryer or other
equipment near the TV.
• Adjust the antenna direction for
minimum interference. Contact a
Sony dealer for advice.
• Use a highly directional antenna.
• Use the fine tuning (“FINE”) function.
• Adjust the antenna direction. Contact
a Sony dealer for advice.
• Turn off or disconnect the booster if it
is in use.
• Display the “A/V CONTROL” menu and
select “ADJUST” of “PICTURE MODE”,
then adjust the “COLOR” level.
• Display the “CH PRESET” menu and
check the color system (“COL SYS”)
setting (usually set this to “AUTO”).
• Adjust the antenna direction. Contact
a Sony dealer for advice.
• Locate external speakers or other
equipment away from the TV. Do not
move the TV while the TV is turned
on. Press
U (main power) on the TV
to turn off the TV for about five
minutes, then turn it on again.
• The volume level is
too low.
• The sound is muted.
• The broadcast signal
has a transmission
problem.
• The digital audio
signal is
inappropriate.
• The “DIGITAL IN”
setting in the “A/V
CONTROL” menu is
inappropriate.
• There is local
interference from
cars, neon signs, hair
dryers, power
generators, etc.
• Broadcast signals are
reflected by nearby
mountains or buildings.
• The antenna direction
needs adjustment.
• Use of a booster is
inappropriate.
• The color level
setting is too low.
• The color system setting
is inappropriate.
• The antenna direction
needs adjustment.
• The magnetic
disturbance from
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.
Possible cause
Symptom Page
11
11
23
7, 32
32
–
–
–
42
–
–
31
40
–
–
Good picture
No sound
Dotted lines or
stripes
Double images or
“ghosts”
No color
Abnormal color
patches
Solutions
46
Additional Information
Troubleshooting (continued)
Possible cause
Symptom
Solutions
• Press A/B until “AUTO” appears on
the screen.
• Check the antenna cable and
connection on the TV, VCR and on the
wall.
• Adjust the antenna direction. Contact a
Sony dealer for advice.
• Press A/B until a better sound is heard.
• Display the “SET UP” menu and adjust
“PIC ROTATION” so that the picture is
aligned to the TV screen.
• Use the fine tuning (“FINE”) function.
• Contact your nearest Sony service
center.
—
—
—
• The stereo reception
setting is inappropriate.
• The connection is loose
or the cable is damaged.
• The antenna direction
needs adjustment.
• The broadcast signal
has a transmission
problem.
• Terrestrial magnetism is
affecting your TV set.
• There is interference
from external sources,
e.g., heavy machineries,
nearby broadcast station.
• Your TV may need
servicing.
• Changes in room
temperature sometimes
make the TV cabinet
expand or contract,
causing a noise. This
does not indicate a
malfunction.
• The TV’s demagnetizing
function is working.
This does not indicate a
malfunction.
• This is the same static
discharge that is felt
when touching metal
door handles or car
doors especially when
the air is dry, for
example in winter. This
does not indicate a
malfunction.
TV cannot receive
stereo broadcast
signal.
Stereo broadcast
sound switches
on and off or
is distorted.
or
The sound switches
between stereo and
monaural frequently.
Picture slant
Lines moving across
the TV screen.
The
1
indicator on
your TV flashes red
a number of times
between 3-second
intervals.
TV cabinet creaks.
A small “boom”
sound is heard
when the TV is
turned on.
Static discharge is
felt when touching
the TV cabinet.
Page
23
4
–
23
37
42
43
–
–
–