background image

2

GB

3

Do not install the appliance in a confined space, such as 
a bookcase or built-in cabinet.

To reduce the risk of fire, do not cover the ventilation 
opening of the apparatus with newspapers, tablecloths, 
curtains, etc. Do not place the naked flame sources such 
as lighted candles on the apparatus.

To reduce the risk of fire or electric shock, do not 
expose this apparatus to dripping or splashing, and do 
not place objects filled with liquids, such as vases, on 
the apparatus.

The stand is not disconnected from the AC power 
source (mains) as long as it is connected to the wall 
outlet (mains), even if the stand itself has been turned 
off.

As the main plug is used to disconnect the unit from the 
mains, connect the unit to an easily accessible AC 
outlet. Should you notice an abnormality in the unit, 
disconnect the main plug from the AC outlet 
immediately.

Batteries or batteries installed apparatus shall not be 
exposed to excessive heat such as sunshine, fire or the 
like.

Disposal of Old Electrical 
& Electronic Equipment 
(Applicable in the 
European Union and 
other European 
countries with separate 
collection systems)

This symbol on the product or on 
its packaging indicates that this 
product shall not be treated as 

household waste. Instead it shall be handed over to the 
applicable collection point for the recycling of 
electrical and electronic equipment. By ensuring this 
product is disposed of correctly, you will help prevent 
potential negative consequences for the environment 
and human health, which could otherwise be caused by 
inappropriate waste handling of this product. The 
recycling of materials will help to conserve natural 
resources. For more detailed information about 
recycling of this product, please contact your local 
Civic Office, your household waste disposal service or 
the shop where you purchased the product.

Disposal of waste 
batteries (applicable in 
the European Union and 
other European 
countries with separate 
collection systems)

This symbol on the battery or on the packaging 
indicates that the battery provided with this product 
shall not be treated as household waste. 

On certain batteries this symbol might be used in 
combination with a chemical symbol. The chemical 
symbols for mercury (Hg) or lead (Pb) are added if the 
battery contains more than 0.0005% mercury or 
0.004% lead.

By ensuring these batteries are disposed of correctly, 
you will help prevent potentially negative 
consequences for the environment and human health 
which could otherwise be caused by inappropriate 
waste handling of the battery. The recycling of the 
materials will help to conserve natural resources. In 
case of products that for safety, performance or data 
integrity reasons require a permanent connection with 
an incorporated battery, this battery should be replaced 
by qualified service staff only. To ensure that the 
battery will be treated properly, hand over the product 
at end-of-life to the applicable collection point for the 
recycling of electrical and electronic equipment. For all 
other batteries, please view the section on how to 
remove the battery from the product safely. Hand the 
battery over to the applicable collection point for the 
recycling of waste batteries. For more detailed 
information about recycling of this product or battery, 
please contact your local Civic Office, your household 
waste disposal service or the shop where you purchased 
the product.

Notice for customers: the following 
information is only applicable to 
equipment sold in countries applying EU 
directives.

The manufacturer of this product is Sony Corporation, 
1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The 
Authorized Representative for EMC and product safety 
is Sony Deutschland GmbH, Hedelfinger Strasse 61, 
70327 Stuttgart, Germany. For any service or guarantee 
matters, please refer to the addresses given in separate 
service or guarantee documents.

WARNING

Содержание RHT-G15









































Отзывы: