Sony RDR-VX515 - Dvd Recorder/vcr Combo, Руководство по эксплуатации

Страница: 106 / 124

106
The
c
indicator flashes after timer recording is
set.
, Insert a recordable disc (page 28).
, Insert a disc with enough space for the recording.
, The disc has 99 or more titles, which prevents
further recording.
, The disc is protected (page 66).
The SYNCHRO REC indicator flashes after
Synchro-Recording is set.
,
Insert a recordable disc (page 28).
,
Insert a disc with enough space for the recording.
,
The disc has 99 or more titles, which prevents
further recording.
,
The disc is protected (page 66).
Contents previously recorded were erased.
, Data that has been recorded on a DVD with a PC
will be erased from the disc when the disc is
inserted.
VCR Playback
The playback picture does not appear on the TV
screen.
, Make sure the TV is set to the channel for the VCR.
If a monitor is used, set it to video input.
The picture is not clear.
, Adjust the tracking by the TR/–
buttons.
, The video heads are dirty (see page 108). Clean
the video heads using a Sony video head cleaning
cassette. If a Sony cleaning cassette is not
available in your area, have the heads cleaned at
your nearest Sony dealer (a standard service fee
will be charged). Do not use a commercially
available liquid type cleaning cassette, as it may
damage the video heads.
, The video heads may have to be replaced.
Consult your local Sony dealer for more
information.
, The tape is defective.
The picture rolls vertically during picture
search.
,
Adjust the vertical hold control on the TV or
monitor.
The picture has no sound.
,
The tape is defective.
,
Check the audio cord connection.
A tape cannot be inserted.
,
Check that a tape is not already in the tape
compartment.
VCR Recording
The channel cannot be changed from the one
you are recording.
, Set the TV’s input source to “TV.”
No TV program appears on the TV screen.
, Make sure the TV is set to the channel for the VCR.
If a monitor is used, set it to video input.
, Select the correct source with the CH +/– or
INPUT SELECT buttons. Select a channel number
when recording TV programs; select “LINE1” or
“LINE2” when recording from other equipment.
TV reception is poor.
, Adjust the TV antenna.
The tape starts playing as soon as it is
inserted.
, The safety tab has been removed. To record on
this tape, cover the tab hole.
The tape is ejected when z REC is pressed.
, Check that the safety tab has not been removed.
Nothing happens when z REC is pressed.
, Make sure the tape is not at its end.
VCR Timer recording
The timer does not operate.
,
Check that the clock is set.
, Make sure a tape has been inserted.
, Check that the safety tab has not been removed.
,
Make sure the tape is not at its end.
, Make sure a program has been set for timer
recording.
,
Make sure the timer settings are set for a future
time.
, Check that the cable box is turned on.
,
“- -:- -“ appears in the front panel display if the
recorder is disconnected from the wall outlet for
more than one minute. Reset the clock and timer.