Sony RDR-HXD890, Руководство по эксплуатации

Страница: 113 / 152

113
Set
tin
gs
a
nd
Adj
u
st
m
e
n
ts
Selects the signal format in which the
recorder outputs video signals: interlace or
progressive, from the COMPONENT
VIDEO OUT jacks.
b
Notes
• When you set “LINE 3 Out” to “RGB,” you
cannot set “Component Video Out.”
• When you connect the recorder to a monitor or
projector via only the COMPONENT VIDEO
OUT jacks, do not set “LINE 3 Out” to “RGB.”
If you set “LINE 3 Out” to “RGB,” in this case,
the picture may not appear.
• When picture noise appears after you set the
recorder to progressive format, hold down x
(stop) on the recorder, and press
Z
(open/close)
on the recorder.
• No video signals are output when using the
HDMI connection.
Selects a method of outputting video signals
for the LINE 3 – TV jack.
Select “Video” (default) when using the
EURO AV adapter (page 19)
Selects a method of inputting video signals
for the LINE 1 jack.
Select “Video” (default) when using the
EURO AV adapter (page 19).
Sets the recorder to convert signals of the
NTSC colour system to the PAL colour
system to play NTSC discs on PAL-only
TVs. Refer to the operating instructions
supplied with your TV.
Component Video Out
Normal(Inter-
lace) Outputs signals in the
interlace format.
Progressive Outputs signals in the
progressive format. Select
this when you want to view
progressive signals.
LINE 3 Out
Video
Outputs video signals.
S-Video
Outputs S-video signals.
RGB
Outputs RGB signals.
LINE 1 In
Video Inputs video signals.
S-Video Inputs S-video signals.
RGB Inputs RGB signals.
NTSC on PAL TV
On Plays NTSC discs on PAL-
only TVs.
Off
Select this if the connected
TV is a multi-system
(NTSC-compatible) TV.