121
Se
tti
n
gs an
d Adj
u
st
m
e
n
ts
LINE 1 In
Selects a method of inputting video signals
for the LINE 1 jack.
Select “Video” (default) when using the
EURO AV adapter (page 26).
NTSC on PAL TV
Sets the recorder to convert signals of the
NTSC colour system to the PAL colour
system to play NTSC discs on PAL-only
TVs. Refer to the operating instructions
supplied with your TV.
Audio Input Settings
(Audio In)
The “Audio In” setup allows you to adjust the
sound according to the playback and
connection conditions.
1
Press SYSTEM MENU while the
recorder is in stop mode.
2
Select “Initial Setup,” and press
ENTER.
3
Select “Audio In,” and press ENTER.
The “Audio In” setup appears with the
following options. The default settings
are underlined.
NICAM Select (page 54)
Analog Tuner Level
If the playback sound is distorted, set this
item to “Compression.” The recorder reduces
the audio output level.
This function affects the output of the
following jacks:
– LINE 2 OUT R-AUDIO-L jacks
– LINE 3 – TV jack
– LINE 1 jack
Video
Inputs video signals.
S-Video
Inputs S-video signals.
RGB
Inputs RGB signals.
On
Plays NTSC discs on PAL-
only TVs.
Off
Select this if the connected
TV is a multi-system
(NTSC-compatible) TV.
NICAM
Normally select this
position.
Standard
Select this if the sound from
NICAM broadcasts is not
clear.
Normal
Normally select this
position.
Compression
Select this when the
playback sound from the
speakers is distorted.
,
continued