C:\2886042111HXD860CEK\01GB-
HXD860CEK\130ADD.fm
master page=right
specdef 20060621
RDR-HXD860
2-886-042-
11
(1)
109
A
d
d
iti
o
n
a
l In
fo
rm
a
tio
n
The programme position cannot be
changed from the programme position you
are recording.
,
Set the TV’s input source to “TV.”
Recording does not start immediately
after you press
z
REC.
,
Operate the recorder only after “LOAD,”
“FORMAT,” or “INFOWRITE” disappears
from the front panel display.
Nothing was recorded even though you set
the timer setting correctly.
,
There was a power failure during recording.
,
The recorder’s internal clock stopped due to
a power failure that lasted for more than 1
hour. Reset the clock (page 89).
,
Disconnect the mains lead from the mains,
and connect it again.
,
The programme contains copy protection
signals that restrict copying.
,
Other timer setting overlapped the timer
setting (page 56).
,
There is no DVD inside the recorder.
,
There is not enough disc space for the
recording.
,
The recorder was in the process of dubbing
(HDD
y
DVD).
,
The recorder was in the process of DV
Dubbing.
,
A scrambled channel is selected.
,
The Channel activated Parental Lock is
selected (page 90).
Recording does not stop immediately
after you press
x
REC STOP.
,
It will take a few seconds for the recorder to
input disc data before recording can stop.
Recording does not stop after you press
x
.
,
Press
x
REC STOP.
Timer recording is not complete or did not
start from the beginning.
,
There was a power failure during recording.
If the power recovers when there is a timer
recording, the recorder resumes recording.
Should the power failure continue for more
than 1 hour, reset the clock (page 89).
,
Other timer setting overlapped the timer
setting (page 56).
,
Disc space was not enough.
Contents previously recorded were
erased.
,
Data that is not playable on this recorder but
was recorded on a DVD with a PC will be
erased from the disc when the disc is
inserted.
,
“Auto Title Erase” of the “Timer Settings”
in the “Recording” setup is set to “On”
(page 100).
Nothing was recorded even though you set
the Synchro-Rec setting correctly.
,
You forgot to turn off the connected
equipment. Turn off the connected
equipment and set the recorder to Synchro-
Rec standby mode (page 57).
,
The recorder was not set to the Synchro-
Recording standby mode. Press
c
z
SYNCHRO REC to have the recorder
stand by for recording. Make sure the
SYNCHRO REC indicator lights up on the
front panel (page 57).
,
The equipment is not connected to the LINE
3 jack of the recorder.
,
The recorder is connected to the TV output
jack of the connected equipment.
Synchro-Recording does not complete.
,
The timer setting for the connected
equipment overlapped the recorder’s timer
setting (page 58).
,
There was a power failure during the
recording.
Recording/Timer recording/
Editing
Recording from the equipment
with a timer
,
continued