13
H
ook
up
s and
Se
tti
n
gs
With this hookup, you can record any channel on the cable box or satellite receiver. Be sure that
the satellite receiver or cable box is turned on.
To watch cable or satellite channel, you need to match the channel on the recorder (L1 or L3)
to the input jack connected to the cable box or satellite receiver (LINE IN 1 or 3).
z
Hints
• If your cable box or satellite receiver has an S-video jack, you can use an S-video cord (not supplied)
instead of the audio/video cord.
• If you connect an S-video cord to the LINE IN 1 jack, set “Line1 Input” of the “Line Input” to “S Video”
in the “Video” setup (page 84). If you connect an S-video cord to the LINE IN 3 jack, set “Line3 Input”
of the “Line Input” to “S Video” in the “Video” setup (page 84).
A: Cable box or satellite receiver with a video/audio output
to LINE IN 1 or 3
DVD recorder
Audio/video cord
(not supplied)
: Signal flow
Cable box/satellite receiver
Antenna cable
(supplied)
to antenna input
S-video cord
(not supplied)
Wall
TV
,
continued