Sony PXW-Z150 XDCAM, Руководство по эксплуатации

Страница: 57 / 152

57
Re
cor
d
in
g
COPY
To copy the settings of the picture profile to
another picture profile number.
RESET
To reset the picture profile to the default
setting.
To copy the picture profile setting to
another picture profile number
1
Press the MENU button.
2
Select (CAMERA SET) t
[PICTURE PROFILE] t the desired
picture profile number using the V / v / B /
b /SET button, then press the button
again.
3
Press the V / v / B / b /SET button, then
select [SETTING]
t
[COPY].
4
Press the V / v / B / b /SET button, select
the picture profile number of the
destination, then press the button again.
5
Press the V / v / B / b /SET button, then
select [YES]
t
[ RETURN]
t
[OK].
To reset the picture profile settings
You can reset the picture profile settings by
each picture profile number. You cannot
reset all picture profile settings at once.
1
Press the MENU button.
2
Select (CAMERA SET)
t
[PICTURE PROFILE] t the desired
picture profile number using the
V
/
v
/
B
/
b /SET button, then press the button
again.
3
Press the V / v / B / b /SET button, then
select [SETTING] t [RESET] t
[YES] t [ RETURN] t [OK].
The camcorder records movies
accompanied by time data, such as time
code and user bit.
1
Press the MENU button, press the V / v /
B / b /SET button and select (TC/
UB SET) t [TC PRESET], then press
the button again.
2
Press the V / v / B / b /SET button, select
[PRESET], then press the button again.
3
Press the V / v / B / b /SET button, select
the first two digits, then press the button
again. You can set the time code within
the following range.
When [60i] is selected:
00:00:00:00 to 23:59:59:29
• When setting 24p, you can set the last 2 time
code digits of the frames in multiples of 4,
between 0 and 23.
When [50i] is selected:
00:00:00:00 to 23:59:59:24
4
Set other digits by repeating step
3
.
5
Press the V / v / B / b /SET button, select
[OK], then press the button again.
To reset the time code
Select [RESET] in step
2
of “Setting the
time code” to reset the time code
(00:00:00:00).
To reset the time code using the
Wireless Remote Commander
You can reset the time code (00:00:00:00)
also by pressing the TC RESET button on
the Wireless Remote Commander.
1
Press the MENU button, press the V / v /
B / b /SET button and select (TC/
UB SET) t [UB PRESET], then press
the button again.
2
Press the
V
/
v
/
B
/
b
/SET button, select
[PRESET], then press the button again.
Setting time data
Setting the time code
Setting the user bits
Continued ,