179
If the computer is equipped with an ExpressCard/
34 or ExpressCard/54 slot, you can directly insert
the SxS memory card containing clips recorded
with this camcorder and access to the files.
Notes
• Before operating clips, set the SxS memory card to the
read-only mode and make a backup copy to a computer
to protect data. Do the same when using a reader/
writer.
• The SxS Device Driver Software and the UDF Driver
Software must be downloaded and installed on your
computer. For details about application software, see
“Software Downloads” (page 204)
• Operation is not guaranteed with all computers.
For support information for the driver, visit the
following URL:
http://www.sony.net/SxS-Support/
On Windows
Check that a Removable Disk appears in My
Computer. This indicates normal status.
On Macintosh
An icon is displayed on the menu bar.
Preparations
When you connect the camcorder to a computer
using a USB cable (not supplied), the memory
card in the slot is acknowledged as an extended
drive by the computer.
When two memory cards are mounted in this
camcorder, they are acknowledged as two
independent extended drives by the computer.
Notes
• When connecting the USB cable to the computer, be
careful to check the form and direction of the PC
connector.
• The camcorder does not work on the bus power from a
computer. Use a separate power supply.
• Connection is not possible when transferring part of an
original file
using the function of the
optional CBK-WA101 Wireless Adapter.
To start USB connection
When you connect a computer to the PC
connector with a USB cable (not supplied), the
message “Connect USB Now?” is displayed to
prompt you to confirm that you wish to enable the
USB connection.
If you select “Cancel” or push the MENU
CANCEL/PRST/ESCAPE switch down to the
ESCAPE side or if you disconnect the USB cable,
the message “Connect USB Now?” disappears.
If you select “Execute” and press the MENU
knob, the USB connection is enabled and this
camcorder is recognized as an extension drive.
You can carry out the same operations by using
the arrow buttons (
J
,
j
,
K
,
k
)
.
Managing/Editing Clips
with a Computer
Using the ExpressCard Slot of a
Computer
USB Connection with a Computer
To the
ExpressCard slot
SxS memory
card
Computer with SxS Device
Driver Software installed
USB cable
(not supplied)
Содержание PXW-X320
Страница 223: ......