Sony PXW-X160, Руководство по эксплуатации

Страница: 25 / 120

Using a UTILITY SD card 25
P
repa
ra
ti
ons
For a “Memory Stick” or an SD card that was
formatted with another system unsupported by
this camcorder, the message “Unsupported File
System” is displayed on the LCD/viewfinder
screen.
Format the “Memory Stick” or SD card as
instructed below.
To execute formatting
Using “Format Media” (page 80) of the
Media menu, specify “Media(A)” (slot A) or
“Media(B)” (slot B), then select “Execute.”
An in-progress message is displayed, and the
access lamp lights in red.
When formatting is completed, a completion
message is displayed for three seconds.
Notes
• When formatting, all data in a “Memory Stick” or an
SD card, including protected images, is erased and
cannot be restored.
To use media formatted with this camcorder in
the slots of other devices
Make a backup of the media, then format it using
the other device.
You can store the setting value file of the camera
on an SD card (sold separately). The stored file
can be loaded from the SD card.
SDHC memory card * (Speed Class: 4 to 10,
UHS is not compatible, Capacity: 2 GB to 32 GB)
SD memory card * (Capacity: up to 2 GB)
* Indicated as “SD card” in this Operating Guide.
1
Open the cover of the UTILITY SD slot
(page 10) .
2
Insert the UTILITY SD card into the
slot with the UTILITY SD label facing
right.
The access lamp (page 10) lights in red, then
turns off when the memory card is ready for
use.
3
Close the cover.
Open the cover of the UTILITY SD slot
(page 10) , remove the SD card by pressing
the SD card once lightly.
Notes
• Data integrity is not guaranteed if the power is turned
off or a memory card is removed while it is being
accessed. Data on the card may be destroyed. Be sure
that its access lamp is off before you turn off the power
or remove a memory card.
• Make sure that the card does not pop out when
inserting or removing it.
Using a UTILITY SD card
Usable SD cards
Inserting an SD card
Removing an SD card