Sony PVM-741, Руководство по эксплуатации

Страница: 30 / 36

Adjustment Using the Menus
30
REMOTE menu
PARALLEL REMOTE
Submenu Setting
SDI AUDIO SETTING Sets the audio channel when SDI
signal is input.
•
3G/HD/SD : Selects from among
channels CH1 to CH16, odd
c even channel
(CH1+CH2,
CH3+CH4···CH15+CH16)
and OFF.
You can display the L/R audio
levels of the selected channels. (see
“WFM/ALM/VECTOR (waveform
monitor, audio level meter, and
vectorscope) SETTING” on page
25).
•
SPEAKER OUTPUT : Select an
audio format to output from
speakers, headphone jack,
and AUDIO OUT
connector.
EMBEDDED : Outputs an
audio signal embedded in
SDI.
ANALOG : Outputs an
audio signal that comes from
the AUDIO IN connector.
Note
The SDI audio signal is compatible
only with 24 bit.
PA R A L L E L R E M O T E :
S E R I A L R E M O T E : xxxxxxx
M O N I T O R :
C O N T R O L L E R :
C O N N E C T I O N :
xxx
REMOTE
PA R A L L E L R E M O T E :
1 P I N :
xxxx
2 P I N : xxxx
3 P I N : xxxx
4 P I N : xxxx
6 P I N : xxxx
7 P I N : xxxx
8 P I N : xxxx
F O R C E D TA L LY: xxx
REMOTE – PA R A L L E L R E M O T E
Submenu Setting
PARALLEL REMOTE Selects the PARALLEL REMOTE
connector pins for which you want
to change the function.
You can assign various functions to
1 to 4 pins and 6 to 8 pins. The
following lists the functions you
can assign to the pins.
• – – – (“– – –”: No function is
assigned.)
• COMPOSITE
• HDMI
• SDI 1
• SDI 2
• WFM/ALM/VS
• OVERSCAN
• NORMAL
• NATIVE
• 4:3
• 16:9
• TALLY R
• TALLY G
• BLUE ONLY
• MONO
• H/V DELAY
• 16:9 MARKER
• 15:9 MARKER
• 14:9 MARKER
• 13:9 MARKER
• 1.85:1 MARKER
• 2.35:1 MARKER
• 1.85:1 & 4:3 MARKER
• 4:3 MARKER
• CENTER MARKER
• MARKER MAT HALF
• SAFE AREA 80%
• SAFE AREA 85%
• SAFE AREA 88%
• SAFE AREA 90%
• SAFE AREA 93%
• FLIP H
• FLIP V
• FLIP HV
Notes
• If you use the PARALLEL
REMOTE function, you need to
connect cables. For more details,
see page 33.
• Set MARKER ENABLE
(page 24) to ON to control the
aspect marker and center
marker.