Adjusting the Height of the Stand
13
Adjusting the Height of
the Stand
You can adjust the height of the monitor in three levels
by changing the position of the stand attachment bracket
and the arm attachment position. Depending on the
height, you can install the input adaptor with the stand
attached to the monitor.
A and B in the following list indicate the screw holes
shown in the illustrations in steps
2
and
4
.
Height of the monitor
Unit: mm (inches)
1)
You can install the input adaptor with the stand attached to the
monitor.
2)
Default setting
3)
You cannot attach the stand in combinations of these positions.
1
Remove the stand attachment bracket
(see “To remove the stand attachment bracket”).
2
Attach the stand attachment bracket to the A or B
screw holes.
The bracket is attached to the B holes at the factory.
3
Attach the stand attachment bracket with four
screws.
Use the screws removed in step
5
4
Attach the arm.
5
Secure the arm with four screws.
Use the screws removed in step
3
6
Attach the arm cover.
To remove the stand attachment bracket
1
Put the monitor on a soft cloth with the surface of
the LCD monitor downward.
2
Slide and remove the arm cover of the stand.
3
Remove four screws.
4
Remove the arm.
5
Remove four screws to remove the stand
attachment bracket.
Position of the stand
attachment bracket
A
A
B
B
Arm attachment
position
B
A
B
A
LMD-2451W
–
3)
430.5
(17)
471.6
1)
(18
5
/
8
)
497.9
1), 2)
(19
5
/
8
)
+
–
A
A
A
A
B
B
B
B
A
A
A: Screw holes for low position
B: Screw holes for high position
+
–
A
A
B
B
B
B
A
A
A
A
B
B
B
B
A
A
Hang the hook of the bracket for using
the A screw holes.
Hang the hook of
the bracket for
using the B screw
holes.
5
1
4
3
2
