26
Installation
A. choose the location, keeping in mind the
following restrictions.
a. Install the TV on a wall that is both vertical
and flat.
b. Do not install the Wall Mount on curved
wall surfaces such as a pillar, or where the
corners or the sides of the TV protrude away
from the wall surface.
c. Do not install the TV over or under an air
conditioner.
d. The Wall Mount is not compatible with walls
that have metal studs.
B. For wood stud construction, use your stud finder
to find two studs. Follow the instructions that came
with the stud finder and mark the stud locations in
pencil.
c. For concrete walls, there is no need to locate and
mark the stud.
A. clear a table or floor space for your television.
CAUTION! The screens of many flat panel televisions
are fragile. The space must be completely clear of
obstructions that could damage the television.
B. If necessary, remove the television from its base,
following the instructions in the TV’s operating
instructions.
CAUTION! When moving the television, take care
not to touch the screen.
CAUTION! Be sure that two or more persons carry the
TV when transporting, mounting, or dismounting it.
c. Lay your television face down on the space that
you’ve cleared.
STEP 1:
choose the location and mark the studs
STEP 2:
Mark the screw locations on the wall.
D. Locate the “VESA” mount screw holes on the
back of the television. These will form a rectangle or
square that measures 200, 300, 400, 500 or 600 mm
(approximately 8, 12, 16, 20 or 24 inches) across
E. Locate the top pair of “VESA” mount screw holes.
Measure the distance from the center of one
screw hole to the top of the television. Write the
measurement in the space below.
LINE 1:
Write down the distance from
the center of the top “VESA” mount
holes to the top of the television.
inches (or) mm
F. Measure the horizontal distance between centers
for the top two “VESA” mount holes. circle the
measurement in the left column below. Write the
corresponding Adjustment Distance into the space
below.
Distance between the
top “VESA” mount holes.
Adjustment
Distance
Approx. 8” (200 mm)
1-9/16” (40 mm)
Approx. 12” (300 mm)
1-3/4” (45 mm)
Approx. 16” (400 mm)
2-3/16” (55 mm)
Approx. 20” (500 mm)
2-3/16” (56 mm)
Approx. 24” (600 mm)
2-5/16” (58 mm)
LINE 2:
Write down the Adjustment
Distance for your VESA mount holes.
inches (or) mm
G. Subtract to get the Top Screw Distance. Write
your answer in the space below.
LINE 3:
Subtract Line 2 from Line 1 to
get the Top Screw Distance and write
down the result.
inches (or) mm
H. Determine how high on the wall you want the
television to be.
I. For concrete walls, make a small pencil mark where
you want the Top center of the television to go.
STEP 2
(continued)
cOnTInuED
➔
