Sony PMW400K, Руководство по эксплуатации, Страница: 14 / 212

Locations and Functions of Parts and Controls 14
Chapt
er
1
Ov
er
v
ie
w
Right side (near the front)
a
ASSIGN. (assignable) 1/2/3 switches
You can assign the desired functions to these
switches on “OPERATION” > “Assignable SW”
in the setup menu
(see page 158) .
The ASSIGN.1/3 switches are provided with an
indicator to show whether a function is assigned
to the switch (ON) or not (OFF).
b
COLOR TEMP. (color temperature)
button
You can also use this button as an assignable
switch
(see page 158) .
c
ALARM (alarm tone volume
adjustment) knob
Controls the volume of the warning tone that is
output via the built-in speaker or optional
earphones. When the knob is turned to the
minimum position, no sound can be heard.
However, if “MAINTENANCE” > “Audio” >
“Min Alarm Volume” in the setup menu is set to
“Set,” the alarm tone is audible even when this
volume control is at the minimum position.
d
MONITOR (monitor volume
adjustment) knob
Controls the volume of the sound other than the
warning tone that is output via the built-in speaker
or earphones. When the knob is turned to the
minimum position, no sound can be heard.
e
MONITOR (audio monitor selection)
switches
By means of combinations of the two switches,
you can select audio that you want to hear through
the built-in speaker or earphones.
Position of down-side switch: CH-1/2
Position of down-side switch: CH-3/4
a) By connecting stereo headphones to the EARPHONE
jack, you can hear the audio in stereo. (Under
“MAINTENANCE” > “Audio” in the setup menu,
“Headphone Out” must be set to “Stereo.”)
f
ASSIGN. (assignable) 0 switch
You can assign the desired function to this switch
on “OPERATION” > “Assignable SW” in the
setup menu
(see page 159) .
This is a momentary type switch. Each press of
the switch turns the function assigned to this
switch on or off.
Position of up-side
switch Audio output
CH-1/CH-3 Channel 1 audio
MIX Channels 1 and 2 mixed
audio (stereo)
a)
CH-2/CH-4 Channel 2 audio
Position of up-side
switch Audio output
CH-1/CH-3 Channel 3 audio
MIX Channels 3 and 4 mixed
audio (stereo)
a)
CH-2/CH-4 Channel 4 audio
ALARM
Minimum Maximum