Recording Audio Signals
64
Record
ing
Set the AUDIO IN switches, both CH-1 and
CH-2, to INT.
1
Set the AUDIO IN switches CH-1 and
CH-2 to EXT.
2
Connect external audio sources to the
AUDIO IN connectors CH-1 and CH-2.
3
Set the LINE/MIC/MIC+48V switches
CH-1 and CH-2 to LINE (line level:
+4 dBu).
You can use an external microphone for
recording, such as the ECM-673 Electret
Condenser Microphone.
1
Loosen the screw of the microphone
holder and open the cover.
2
Attach a microphone, close the
microphone holder cover for the
original condition to secure, then
connect the microphone cable to either
of the AUDIO IN connectors (CH-1 or
CH-2).
3
Set the corresponding AUDIO IN
switch (CH-1 or CH-2) to EXT.
4
Set the corresponding LINE/MIC/+48V
switch (CH-1 or CH-2) according to the
connected microphone.
MIC:
For a microphone that requires no
power supply
MIC +48V:
For a microphone that requires
+48V power supply (such as the ECM-
673)
Note
Even when recording CH-1 for 2-channel
monaural by setting “EXT CH Select” of “Audio
Input”
of the AUDIO SET menu to
“CH-1,” set the LINE/MIC/MIC+48V switch for
CH-2 to the same position as that for CH-1.
You can select automatic or manual adjustment
mode independently for each channel.
To adjust the levels automatically (AGC)
When the AUDIO SELECT switches CH-1 and
CH-2 are set to AUTO, the audio recording levels
are automatically adjusted.
Using the Built-in Stereo
Microphones
Using External Inputs
Using an External Microphone
A
SH
OT
TR
AN
SIT
IO
N
B
LC
D B
.L
IG
HT
ON
THU
MNA
IL
F R
EV
PRE
V
SEL/S
ET
PLAY
/PAU
SE
STO
P
CAN
CEL
F FW
D
NEX
T
REC
STA
RT/S
TOP
HOLD
l
s
L
j
G
/
S
J
MON
ITOR
VOL
H
L
OFF
R
L
T
W
AUDIO
IN
CH-1
MIC
LINE
MIC+48V
MIC
LINE
MIC+48V
CH-2
Adjusting the Audio Recording
Levels
A
SH
OT
TR
AN
SIT
IO
N
B
LC
D B
.LIG
HT
ON
THU
MNA
IL
F RE
V
PRE
V
SEL
/SE
T
PLAY
/PAU
SE
STO
P
CAN
CEL
F FW
D
NEX
T
REC
STA
RT/S
TOP
HOL
D
l
s
L
j
G
/
S
J
MON
ITO
R
VOL
H
L
OFF
R
L
T
W
AUDIO
IN
CH-1
MIC
LINE
MIC+48V
MIC
LINE
MIC+48V
CH-2
AUDIO
IN
CH-1
MIC
LINE
MIC+48V
MIC
LINE
MIC+48V
CH-2
1
2
4
3
External
microphone
to AUDIO IN
Cable clamp