Setup Menu List
127
Me
n
u
C
o
nf
igur
at
io
n
a
nd Det
a
ile
d Set
tings
AUDIO SET Menu
AUDIO SET
Menu items
Subitems and setting values
Contents
Audio Input
Setting for audio
inputs
[M]
TRIM CH-1
–20 dBu to –65 dBu (
–41 dBu
)
Finely adjust the sensitivity of channel 1 of external
microphone input in steps of 3 dB in Manual audio
adjustment mode.
TRIM CH-2
–20 dBu to –65 dBu (
–41 dBu
)
Finely adjust the sensitivity of channel 2 of external
microphone input in steps of 3 dB in Manual audio
adjustment mode.
INT MIC Level
–12 dB / –6 dB /
–0 dB
/ +6 dB
/ +12 dB
Select the built-in microphone level in Manual audio
adjustment mode.
Limiter
On /
Off
Turn the audio limiter on/off.
MIC AGC
High
/ Low
Select the sensitivity of the microphone inputs.
AGC Link
Linked
/ Separated
Select the gain link condition when the audio level adjustment
is in AGC mode.
Linked: To vary the CH-1 gain and the CH-2 gain in
synchronization.
Separated: To vary the CH-1 gain and the CH-2 gain
independently according to the respective levels.
1KHz Tone
On /
Off
Turn the 1-kHz reference tone signal on/off.
Wind Filter CH-1
On /
Off
Turn the wind filter for channel 1 on/off.
Wind Filter CH-2
On /
Off
Turn the wind filter for channel 2 on/off.
EXT CH Select
CH-1
CH-1/CH-2
CH-1: To record channel 1 audio input on both channels 1
and 2.
It is recommended to set the AUDIO SELECT (AUTO/
MANUAL) switch and AUDIO LEVEL control for CH-2
as well as the above TRIM CH-2 to the same
conditions as those for CH-1.
CH-1/CH-2: To record channel 1 and channel 2 inputs on the
respective channels.
Audio Output
Setting for audio
outputs
Monitor CH
CH-1/CH-2
(CH-3/CH-4)
CH-1+CH-2 (CH-3+CH-4)
CH-1 (CH-3)
CH-2 (CH-4)
Select the audio channel(s) to be fed to the headphones and
the built-in speaker.
CH-1/CH-2 (CH-3/CH-4): Stereo
CH-1+CH-2 (CH-3+CH-4): Mix
CH-1 (CH-3): CH-1 (CH-3) only
CH-2 (CH-4): CH-2 (CH-4) only
( ): with Output CH set to “CH-3/CH-4”
Output CH
CH-1/CH-2
CH-3/CH-4
Select audio output channels from either channels 1 and 2 or
channels 3 and 4.
Alarm Level
0 to 7 (
4
)
Set the alarm sound volume.
Beep
On /
Off
Select whether or not to sound a beep upon each operation.