manualshive.com logo in svg

Sony PMC-MD55 - Md Boombox, Руководство по обслуживанию

Поделиться
Скачать
Sony PMC-MD55 - Md Boombox Скачать руководство пользователя страница 133

– 24 –

7. TEMPERATURE COMPENSATION OFFSET

ADJUSTMENT

Save the temperature data at that time in the non-volatile memory
as 25 ˚C reference data.

Note :

1. Usually, do not perform this adjustment.
2. Perform this adjustment in an ambient temperature of 22 ˚C to 28 ˚C.

Perform it immediately after the power is turned on when the internal
temperature of the unit is the same as the ambient temperature of 22 ˚C
to 28 ˚C.

3. When D101 has been replaced, perform this adjustment after the tem-

perature of this part has become the ambient temperature.

Adjusting Procedure :
1. Turn the JOG dial to display “TEMP ADJUST”.
2. Press the 

[YES, ENTER]

 button to select the “TEMP ADJUST”

mode.

3. “TEMP = 

” and the current temperature data will be dis-

played.

4. To save the data, press the 

[YES, ENTER]

 button.

When not saving the data, press the 

[NO, CANCEL]

 button.

5. When the 

[YES, ENTER]

 button is pressed, “TEMP = 

 SAVE”

will be displayed and turned back to “TEMP ADJUST” dis-
play then. When the 

[NO, CANCEL]

 button is pressed, “TEMP

ADJUST” will be displayed immediately.

Specified Value :
The “TEMP =  

” should be within “E0 - EF”, “F0 - FF”, “00 -

0F”,  “10 - 1F” and “20 - 2F”.

8. LASER POWER ADJUSTMENT

Connection :

Adjusting Procedure :
1. Set the laser power meter on the objective lens of the optical

pick-up. (When it cannot be set properly, press the

m

button

or

M

button to move the optical pick-up)

Connect the digital voltmeter to CN110 pin 

5

 (I+3V) and

CN110 pin 

4

 (IOP) on the BD board.

2. Turn the JOG dial to display “LDPWR ADJUST”.

(Laser power : For adjustment)

3. Press the 

[YES, ENTER]

 button once to display “LD 0.9 mW

$ 

”.

4. Turn the JOG dial so that the reading of the laser power meter

becomes 0.85 to 0.91 mW. Press the 

[YES, ENTER]

 button

after setting the range knob of the laser power meter, and save
the adjustment results. (“LD SAVE $ 

” will be displayed for

a moment)

5. Then “LD 7.0 mW $ 

” will be displayed.

6. Turn the JOG dial so that the reading of the laser power meter

becomes 6.9 to 7.1 mW, press the 

[YES, ENTER]

 button to

save it.

Note:

Do not perform the emission with 7.0 mW more than 15 seconds
continuously.

7. Then, turn the JOG dial to display “LDPWR CHECK”.
8. Press the 

[YES, ENTER]

 button once to display “LD 0.9 mW

$ 

”. Check that the reading of the laser power meter become

0.85 to 0.91 mW.

9. Press the 

[YES, ENTER]

 button once more to display “LD 7.0

mW $ 

”. Check that the reading the laser power meter and

digital voltmeter satisfy the specified value.
Note down the digital voltmeter reading value.

Specified Value:
Laser power meter reading: 7.0 ± 0.2 mW
Digital voltmeter reading : Value on the optical pick-up label

±10%

10. Press the 

[NO, CANCEL]

 button to display “LDPWR CHECK”

and stop the laser emission.
(The 

[NO, CANCEL]

 button is effective at all times to stop the

laser emission)

Note 1:

After step 9, each time the

 

[YES, ENTER]

 

button is pressed, the

display will be switched “LD 0.7 mW $ 

”, “LD 6.2 mW $ 

”,

and “LD WP 

 $ 

”. Nothing needs to be performed

here.

Optical pick-up
objective lens

laser
power meter

+
–

BD board

digital voltmeter

CN110 pin 

5

 (I +3V)

CN110 pin 

4

 (IOP)

[     ]

KMS260A

27X40
B0825

lOP=82.5 mA in this case
lOP (mA) = Digital voltmeter reading (mV)/1 (

Ω

)

(Optical pick-up label)

[      ]

Содержание PMC-MD55 - Md Boombox





























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды