– 6 –
Basic Operations
12
Recording on a tape (continued)
Tips
• Adjusting the volume or
the audio emphasis
(page 22) will not affect
the recording level.
• When
or
is
displayed, recording
will be made on both
sides of the tape. To
record on one side, press
DIR MODE to display
.
• If the AM radio makes a
whistling sound after
you’ve pressed
z/X
in
step 3, press MODE to
select the position that
most decreases the
noise.
Note
When you start
recording using CD
DUBBING, you cannot
set the player in pause.
Use these buttons for additional operations
To
Press
stop recording
x
on the tape section
pause recording
z/X
Press the button again to
resume recording.
turn on/off the player
POWER
To erase a recording, proceed as follows:
1
Insert a tape you want to erase its recording into the tape
deck and press
x
on the tape section.
2
On the player: press
z/X
and then
N
.
On the remote: While keeping
z/X
pressed, press
TAPE
N
.
x
DIR MODE
MODE
POWER
n
,
N
z/X
The Timer
23
Setting the clock
“– –:– –” indication appears in the
display until you set the clock.
The Timer
Tip
The time display
system of this player is
the 12-hour system.
Before you begin, hook up the system (see pages 32 -
36).
1
Press and hold CLOCK until the hour digit flashes.
2
Set the clock.
1
Press TUNE TIME SET
+ or – to set the hour
and press ENTER
MEMORY.
2
Press TUNE TIME SET
+ or – to set the
minutes.
3
If you are on daylight saving time, press SUMMER
TIME.
4
Press ENTER MEMORY.
The clock starts from 00 seconds.
m
TUNE TIME SET –, +
ENTER
MEMORY
SUMMER
TIME
CLOCK
Audio Emphasis/The Timer
continued
The Timer
24
To change the display to the daylight saving time
(summer time) indication
Press and hold SUMMER TIME for 2 seconds.
“SUMMER ON ” appears in the display for a few
seconds.
To cancel the summer time indication
Press and hold SUMMER TIME again.
“SUMMER OFF” appears in the display for a few
seconds.
Setting the clock (continued)
