The Timer
24
Timer-recording
radio programs
You can set timer to record the radio at a
certain time. You can also record the
sound of the component connected to
the LINE IN jack, using the timer. Make
sure you have set the clock (see “Setting
the clock” on page 20.)
Before you begin, make sure the
t
(clock) indication
is not lit in the display. If it is lit, press STANDBY.
1
Tune in the radio station and insert a cassette for
recording.
2
Press DIR MODE on
the player to select
direction of the tape.
3
Press TIMER/CLOCK to display the
t
indication.
Do the following operations by checking the
display window.
4
Press
0
/– or
)
/+ until “REC” appears in the
display, and press DISPLAY/ENTER.
5
Press
0
/– or
)
/+ until “RADIO” appears in
the display, and press DISPLAY/ENTER.
When recording the sound of the component
connected to the LINE IN jack, press
0
/– or
)
/+ to display “LINE,” and press DISPLAY/
ENTER.
Display
One side
Both sides
Note
You cannot preset
recording timer and
wake-up timer (page
21) at the same time.
Tip
When you receive the
AM program in step 1,
press
r
/
P
to check if
the noise is heard. If so,
press PLAY MODE/
MONO/ST/ISS on the
player to select the
position that most
decreases the noise.
DISPLAY/
ENTER
STANDBY
TIMER/
CLOCK
0
/–,
)
/+
