86
Setup Menu
Chapt
er
7
Menu
s
The extended menu appears when maintenance menu item
M40 EXTENDED MENU is set to “ENABLE”.
Items in the basic menu
The basic menu items (excluding the items related to the
operating hours meter) are listed in the following table.
• The values in the “Settings” column are the values that
appear on settings screens. The values in brackets [ ] are
the value shown on menu screens (when they differ from
the values shown on settings screens).
• The underlined values are the factory defaults.
Item group
Function
Refer to
Items
100 to 199
Settings relating to control
panels
Items
200 to 299
Settings relating to the remote
control interface
Items
300 to 399
Settings relating to editing
operations
Items
500 to 599
Settings relating to disc
protection
Items
600 to 649
Settings relating to the
timecode generator
Items
650 to 699
Settings relating to metadata
Items
700 to 799
Settings relating to video
control
Items
800 to 899
Settings relating to audio
control
Items
900 to 999
Settings relating to digital
processing
Item group
Function
Refer to
Item number
Item name
Settings
002
CHARACTER H-POSITION
Adjust the horizontal screen position (as a hexadecimal value) of the text
information output from the COMPOSITE OUTPUT 2 (SUPER), SDSDI
OUTPUT 2 (SUPER), HDSDI OUTPUT 2 (SUPER), or HDMI OUT connector
for superimposed display on the monitor. The hexadecimal value 00 is for the
far left of the screen. Increasing the value moves the position of the characters
to the right.
00 to 0C to 28 (When the number of system lines is 1080 and the system
frequency is 59.94i, 29.97P, 50i, 25P, or 23.98P)
00 to 0B to 28 (When the number of system lines is 720 and the system
frequency is 59.94P or 50P)
Set this item by adjusting to the required position while viewing the monitor.
003
CHARACTER V-POSITION
Adjust the vertical screen position (as a hexadecimal value) of the text
information output from the COMPOSITE OUTPUT 2 (SUPER), SDSDI
OUTPUT 2 (SUPER), HDSDI OUTPUT 2 (SUPER), or HDMI OUT connector
for superimposed display on the monitor. The hexadecimal value 00 is for the
top of the screen. Increasing the value lowers the position of the characters.
00 to 2A to 32 (When the number of system lines is 1080 and the system
frequency is 59.94i, 29.97P, 50i, 25P, or 23.98P)
00 to 29 to 32 (When the number of system lines is 720 and the system
frequency is 59.94P or 50P)
Set this item by adjusting to the required position while viewing the monitor.
005
DISPLAY INFORMATION
SELECT
Determine the kind of text information to be output from the COMPOSITE
OUTPUT 2 (SUPER), SDSDI OUTPUT 2 (SUPER), HDSDI OUTPUT 2
(SUPER), or HDMI OUT connector.
time data & status [T&sta]
: Time data and the units status.
time data & UB [T&UB]
: Time data and user bits data. (When “UB” (user bits
data) is selected with CNTR SEL on the HOME page of the function
menu, the “user bits data” and “time data” arranged in that order are
displayed.)
time data & CNT [T&CNT]
: Time data and counter count. (When “COUNTER”
is selected with CNTR SEL on the HOME page of the function menu, the
counter count and time data arranged in that order are displayed.)
time data & time data [T&T]
: Time data and timecode (TC or VITC)
time data only [time]
: Time data only
